deconta GmbH | Im Geer 20 | 46419 Isselburg | Tel.: +49 (0) 2874 91 56 0 Fax.: +49 (0) 2874 91 56 11 | E-Mail.: [email protected] | www.deconta.com deconta safety AIR SAMPLING DEVICE AIRSAMPLER The air sampling device airsampler is used to draw in a defined volume flow through a sampling medium for subsequent laboratory analysis. Permanent volume flow control as well as calibrated sensors and a laminar flow element form the basis for precise measurements. The following are measured Lost measuring time due to e.g. power failure is made up for. A potential-free contact enables the connection of external alarm transmitters or mobile phone/telephone diallers. airsampler 30 S [l/min] max. negative pressure 500 [mbar] Operation LCD-Display, keyboard Device status Time Alert status Rods with tube 8x1 Set point Volume flow Actual value Volume flow Subject to technical changes Airsampler-03-2025

deconta GmbH | Im Geer 20 | 46419 Isselburg | Tel.: +49 (0) 2874 91 56 0 Fax.: +49 (0) 2874 91 56 11 | E-Mail.: [email protected] | www.deconta.com ACCESSORIES / OPTIONS BE2328 Measuring data memory module AU2235 Track etched filter Ø 25 Pore width 0,8 µm Gold coating thickness 40 /20 nm AU2245 Single-use monitor, plastic, fully equipped for measuring acc. to TRGS 519, TRGS 521 AU2665 Track etched filter Ø 25 Pore width 0,4 µm Gold coating thickness 40 /20 nm AU2666 Track etched filter Ø 25 Pore width 0,2 µm Gold coating thickness 40 /20 nm AU2237 Track etched filter Ø 37 Pore width 0,8 µm Gold...