*mydirectindustry

Catalogs
Dec Group
MC DecJet® 150

MC DecJet® 150

Product catalog summary

Overview
The MC DecJet® 150 is a pilot-scale fluid jet mill designed for efficient micronizing of powders. It is recognized for its advanced technology, ease of cleaning, and scalability from research to production.

Technical Features

Constructed from high-grade AISI type 316L stainless steel or Hastelloy, polished to RA 0.25 microns.
Features rapid cleaning and easy validation with a simple assembly process.
Design includes no screws, using tri-clover connections for smooth surfaces and easy maintenance.
Achieves high yields with typical production loss at only 0.5% of batch size.

Advantages

Low process gas consumption compared to similar units.
Operates at constant temperature without heat generation.
Facilitates easy scale-up while maintaining consistent Particle Size Distribution (PSD).

Options and Customizations

Available with volumetric or gravimetric feeders and various hopper sizes.
Configurable in top or bottom discharge setups.
Offers special internal linings and sanitary rotary valves for production collection.
Includes CIP and SIP systems, explosion-proof systems, and full automation with PLC.
Integrates PAT technology for in-line particle size analysis and complies with US and ATEX standards for hazardous areas.

Technical Data

Nominal diameter: 150 mm (6 inches).
Estimated capacity: 500 g - 30 kg/h.
Batch size: 0.2 kg - 100 kg.
Process gas consumption: 0.73 Nm3/min at 7 bar and 1.24 Nm3/min at 12 bar.
Installed power: 0.25 kW (0.33 HP).

Applications
The MC DecJet® 150 can be customized for various applications including fine chemicals, cosmetics, and food industries.

Catalog excerpts

Micronizing Micronizing MC DecJet®30 MC DecJet 150 Pilot Scale Research & Development · Hundreds of installations worldwide · ost advanced jet mill on the market M · ffective with more products than any E other jet mill available today · ighly efficient H · ingle pass technology S · Handles sticky, abrasive and very hard products · Scalable product range · Easy to clean, absence of screws · Accurate reproduction from development

Open the catalog to page 1

Micronizing MC DecJet® 150 Pilot Scale The MC DecJet® 150 is the smallest production fluid jet mill which allows easy cleaning and containment. Technical features High grade materials AISI type 316L stainless steel mirror polished to RA 0.25 microns or Hastelloy Rapid cleaning and easy validation Ease and quickness in assembling and disassembling, as well as a limited number of components The simplicity of the whole unit Total absence of screws (replaced by triclover connections), no crevices, smooth and regular surfaces Very low production loss - Typical yields are 99.5 % of batch size, no blow-back...

Open the catalog to page 2

All Dec Group catalogs and technical brochures

Archived catalogs

Pharmaceutical and Chemical Powder Micronization
4 Pages