1. Catalogs
  2. Dec Group
  3. DEC Isocharge
video corpo

DEC Isocharge

DEC Isocharge

DEC Isocharge

Product catalog summary
Overview: The DEC Isocharge is a cost-effective solution for dispensing and charging bags into reactors or receiving systems using the PTS Powder Transfer System. It offers high containment levels of less than 1µg/m³ over an 8-hour TWA, ensuring safe handling of toxic, sticky, or lumpy powders.
Key Features:
  • High containment levels up to <1µg/m³.
  • Safe for operators and the environment.
  • Fast operation for multiple bag emptying.
  • Good working ergonomics and visibility.
  • Integrated fan with control options and HEPA filtration.
  • Continuous liner waste Bag-Out Port and WIP facility.
Design and Materials:
  • Constructed from AISI type 316L stainless steel, glass, and EPDM.
  • Face velocity of 0.7 m/s.
  • Options for other materials like HC22 and internal coatings.
Operational Procedure:
  1. Turn on the exhaust fan and open the door.
  2. Place bags into the isolator and open them.
  3. Pour contents into the hopper and start the PTS.
  4. After emptying, remove the lid of the bag-out port, place bags, replace the lid, tie the bag, and remove for disposal.
Options and Enhancements:
  • Precise dispensing with an integrated scale.
  • Assistance for heavy bag handling.
  • CIP with independent wash down facilities.
  • Integration of delumper for lumpy and agglomerated products.
Contact Information: DEC Group Headquarters, Dietrich Engineering Consultants sa, Switzerland. Tel: +41 21/694 20 40, Fax: +41 21/694 20 59, Email: [email protected]
See more

Catalog excerpts

DEC Isocharge-1

Containment • Emptying Powder Handling Excellence - Fast operation for multiple bag emptying Safe handling of toxic, sticky or lumpy powders Stand-alone unit Cost effective One unit can be used to charge multiple receiving vessels

 Open the catalog to page 1
DEC Isocharge-2

The revolutionary DEC Isocharge is a low cost method of both dispensing and charging bags into reactors or receiving systems via the PTS Powder Transfer System*. The DEC Isocharge combines the advantages of isolation and lami- nar flow technology, providing high containment The station's chamber is open to the side allowing easy bag introduction. A simple door only needs to be closed during WIP to prevent splashes. All WIP fluids can be drained from the chamber via the PTS Powder Transfer System* into the reactor, which also cleans the transfer hose and the PTS. - Fully surrogate tested and can...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.