*mydirectindustry

MB 180

Product catalog summary

Overview: The document provides technical specifications for the MB 180 model of horizontal centrifugal pumps manufactured by DEBEM srl, located in Busto Arsizio, Italy. It includes details on the pump's construction, performance, and available accessories.

Specifications: The MB 180 pump features a maximum flow rate of 80 m³/h and a maximum head of 43 meters. It can handle viscosities up to 500 cps and solids with a maximum diameter of 9 mm. The pump is available in two plastic materials: Polypropylene (PP) and Polyvinylidene fluoride (PVDF), each with specific temperature ranges and weights.

Materials and Construction: The pump casing is constructed from Polypropylene with a glass additive or PVDF with a carbon additive. The operating temperature ranges from 0°C to 70°C for PP and -10°C to 100°C for PVDF. The standard electric motor is rated at 11 kW (15 HP), with a speed of 2900 RPM, and operates on a three-phase 400/690 V, 50/60 Hz power supply.

Performance Curves: The document includes performance curves for flow rate, head, efficiency, power consumption, and NPSH, tested with water at 20°C using a two-pole motor at 50 Hz.

Dimensions and Packaging: Detailed dimensions are provided for the pump, with variations depending on the motor supplier. The pump is packaged in a wooden case measuring 81 x 40 x 56 cm, with a packaging weight of 17 kg.

Sealing and Accessories: The pump uses EPDM or VITON® O-ring materials for sealing. Available accessories include a flange kit (DIN standard, ANSI on request) and a basket filter in Polypropylene or PVDF.

Catalog excerpts

MB 180 Specifications and types Suction fittings Delivery fittings Standard open impeller Solids passing * Special versions are available on request for the fluid pumped MATERIALS OF CONSTRUCTION PUMP CASING, OPERATING TEMPERATURES** AND NET WEIGHT POLYPROPYLENE (with glass additive) PVDF (with carbon additive) PLASTIC MATERIAL * The weights refer to the pump without the motor **Measurements should be taken with agitated water; temperatures may vary depending on the conditions of the system and/or the processed liquid HORIZONTAL CENTRIFUGAL PUMPS PLASTIC MATERIAL Kw HP Constructive Form RPM Three-phase 400/690 V 50/60 Hz 2 poles Efficiency class Protection Ambient temperature Aluminium/Cast iron ATEX DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com STANDARD ELECTR

Open the catalog to page 1

The curves and performances refer to tested pumps, with water at 20 °C, two-pole motor 50 Hz (2900rpm) HORIZONTAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com

Open the catalog to page 2

MB 180 Specifications and types Length measurements in mm * Measurements may vary depending on the motor supplier. Sealing O-ring materials • EPDM • VITON® Imballo • Wooden case si cm 81 x 40 x 56 - Weight 17 Kg (the weight refers only to the packaging without the pump inside) HORIZONTAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com • FLANGE KIT (DIN standard - ANSI on request) • Basket filter in Polypropylene or PVDF

Open the catalog to page 3

MB 180

MB 180

Catalog excerpts

All DEBEM SRL catalogs and technical brochures