*mydirectindustry

MB 160

Product catalog summary

Overview: The document provides technical specifications for the MB 160 model of horizontal centrifugal pumps manufactured by DEBEM srl, located in Busto Arsizio, Italy. It includes details on the pump's construction, performance, and available accessories.

Specifications:

Suction and Delivery Fittings: Suction fittings are 2”1/2 f BSPP or DN 65, and delivery fittings are 2” m BSPP or DN 50.
Performance: Maximum flow rate is 70 m³/h with a maximum head of 32 m. The pump can handle viscosities up to 500 cps and solids with a maximum diameter of 9 mm.
Materials: The pump casing is available in Polypropylene (PP) with glass additive or PVDF with carbon additive. Operating temperatures range from 0°C to +70°C for PP and -10°C to +100°C for PVDF.
Motor: Standard electric motor specifications include 7.5 kW (10 HP), 2900 RPM, three-phase 400/690 V, 50/60 Hz, 2 poles, efficiency class IE3, and protection class IP55. The motor operates in ambient temperatures from -30°C to +45°C.

Construction and Dimensions:

The pump is constructed in a B3 + B5 form with a standard open impeller diameter of 162 mm and height of 11 mm.
Length measurements for the MB 160 model are provided, with specific dimensions for various components.

Packaging and Accessories:

The pump is packaged in a wooden case measuring 70 x 45 x 55 cm, with a packaging weight of 16 kg.
Sealing O-ring materials include EPDM and VITON®.
Available accessories include a flange kit (DIN standard, ANSI on request) and a basket filter in Polypropylene or PVDF.

Performance Curves: The document includes performance curves for the pump, indicating flow rate versus head, efficiency, power, and NPSH, tested with water at 20°C using a two-pole motor at 50 Hz (2900 RPM).

Catalog excerpts

MB 160 Specifications and types Suction fittings Delivery fittings Standard open impeller Solids passing * Special versions are available on request for the fluid pumped MATERIALS OF CONSTRUCTION PUMP CASING, OPERATING TEMPERATURES** AND NET WEIGHT POLYPROPYLENE (with glass additive) PVDF (with carbon additive) PLASTIC MATERIAL * The weights refer to the pump without the motor **Measurements should be taken with agitated water; temperatures may vary depending on the conditions of the system and/or the processed liquid HORIZONTAL CENTRIFUGAL PUMPS PLASTIC MATERIAL Kw HP Constructive Form RPM Three-phase 400/690 V 50/60 Hz 2 poles Efficiency class Protection Ambient temperature Aluminium/Cast iron ATEX DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com STANDARD ELECT

Open the catalog to page 1

The curves and performances refer to tested pumps, with water at 20 °C, two-pole motor 50 Hz (2900rpm) HORIZONTAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com

Open the catalog to page 2

MB 160 Specifications and types Length measurements in mm * Measurements may vary depending on the motor supplier. Sealing O-ring materials • EPDM • VITON® Packaging • Wooden case size cm 70 x 45 x 55 - Weight 16 Kg (the weight refers only to the packaging without the pump inside) HORIZONTAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com • FLANGE KIT (DIN standard - ANSI on request) • Basket filter in Polypropylene or PVDF

Open the catalog to page 3

MB 160

MB 160

Catalog excerpts

All DEBEM SRL catalogs and technical brochures