*mydirectindustry

MB 100

Product catalog summary

Overview: This document provides technical specifications and details for the MB 100 model of horizontal centrifugal pumps manufactured by DEBEM srl. It includes information on materials, performance, and available options.

Specifications:

Flow Rate and Head: Maximum flow rate is 9 m³/h with a maximum head of 12 meters.
Viscosity: Capable of handling fluids with viscosity up to 500 cps.
Impeller: Standard open impeller with a diameter of 97 mm and height of 12 mm, allowing solids passing up to 7 mm in diameter.
Materials: Available in Polypropylene (PP) with glass additive and PVDF with carbon additive. Operating temperatures range from 0°C to 70°C for PP and -10°C to 100°C for PVDF.
Motor: Standard electric motor with 0.55 kW (0.75 HP), operating at 2900/3600 RPM, three-phase 230/400 V, 50/60 Hz, with efficiency class IE2 and protection class IP55.

Construction and Dimensions:

Form: Constructive form B3 + B14.
Dimensions: Detailed length measurements are provided for various components, with specific dimensions for suction and delivery fittings.
Weight: The pump casing weight is 1.7 kg for PP and 2.2 kg for PVDF, excluding the motor.

Performance Curves: The document includes performance curves for flow rate versus head, efficiency, and power consumption, tested with water at 20°C using a two-pole motor at 50 Hz (2900 RPM).

Packaging and Accessories:

Packaging: The pump is packaged in a wooden case measuring 50 x 25 x 35 cm, with a packaging weight of 7 kg.
Sealing Materials: O-ring materials available in EPDM and VITON®.
Accessories: Optional flange kit available in DIN standard, with ANSI on request, and a basket filter in Polypropylene or PVDF.

Additional Options: Special versions are available on request for specific fluid pumping requirements, including single-phase motors up to 3 kW and ATEX certification.

Catalog excerpts

MB 100 Specifications and types Suction fittings Delivery fittings Standard open impeller Solids passing * Special versions are available on request for the fluid pumped MATERIALS OF CONSTRUCTION PUMP CASING, OPERATING TEMPERATURES** AND NET WEIGHT POLYPROPYLENE (with glass additive) PVDF (with carbon additive) PLASTIC MATERIAL * The weights refer to the pump without the motor **Measurements should be taken with agitated water; temperatures may vary depending on the conditions of the system and/or the processed liquid HORIZONTAL CENTRIFUGAL PUMPS PLASTIC MATERIAL Kw HP Constructive Form RPM Three-phase 230/400 V 50/60 Hz 2 poles Efficiency class Protection Ambient temperature Aluminium/Cast iron Single-phase (up to 3 kw) ATEX DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com STANDARD ELECTR

Open the catalog to page 1

The curves and performances refer to tested pumps, with water at 20 °C, two-pole motor 50 Hz (2900rpm) DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com HORIZONTAL CENTRIFUGAL PUMPS

Open the catalog to page 2

MB 100 Specifications and types Length measurements in mm * Measurements may vary depending on the motor supplier. Sealing O-ring materials • EPDM • VITON® Packaging • Wooden case size cm 50 x 25 x 35 - Weight 7 Kg (the weight refers only to the packaging without the pump inside) HORIZONTAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com • FLANGE KIT (DIN standard - ANSI on request) • Basket filter in Polypropylene or PVDF

Open the catalog to page 3

MB 100

MB 100

Catalog excerpts

All DEBEM SRL catalogs and technical brochures