*mydirectindustry

IM 200

Product catalog summary

Vertical Centrifugal Pumps Specifications

Material and Construction: The pumps are constructed from plastic material, specifically polypropylene (PP). Suction fittings are DN 102, with delivery fittings available as 3" m BSPP or DN 80 upon request. The standard open impeller has a diameter of 200 mm and a height of 18.4 mm, with special versions available for specific fluids.

Performance: The maximum flow rate is 170 m³/h, with a maximum head of 46 meters. The pumps can handle viscosities up to 500 cps and solids with a maximum diameter of 15 mm. Available column lengths are 600 mm, 800 mm, and 1000 mm, with corresponding weights of 62 kg, 65 kg, and 67 kg respectively.

Motor Specifications: The standard electric motor ranges from 15 to 18.5 kW (20.8 to 25 HP), with a constructive form of B5. It operates at 2900 RPM, is three-phase (400/690 V, 50/60 Hz), and has an efficiency class of IE3. The motor is protected to IP55 standards and can operate in ambient temperatures ranging from -30°C to +45°C. Options for aluminum or cast iron construction and ATEX certification are available upon request.

Operating Temperatures: For PP with glass additive, the operating temperature range is 0°C to +70°C. Temperature measurements should be taken with agitated water, and actual temperatures may vary based on system conditions and the processed liquid.

Performance Curves: The document includes performance curves for flow rate versus head, efficiency, and power consumption, tested with water at 20°C using a two-pole motor at 50 Hz (2900 RPM).

Model Variants: The document lists various pump models (IM 80 to IM 200) with corresponding motor power ranging from 0.37 kW (0.5 HP) to 18.5 kW (25 HP).

Tank Use and Dimensions: Detailed dimensions for tank use are provided, including measurements for different pump lengths and motor weights.

Packaging and Accessories: Pumps are packaged in wooden cages, with dimensions and weights varying by pump length. Seal o-ring materials include EPDM and VITON®. Accessories available include a flange kit (DIN standard, ANSI on request) and a customizable fixing plate at the design stage.

Catalog excerpts

IM 200 Specifications and types Suction fittings Delivery fittings Standard open impeller Solids passing Available column length (mm) * Special versions are available on request for the fluid pumped OPERATING TEMPERATURES**: PP (with glass additive) **Measurements should be taken with agitated water; temperatures may vary depending on the conditions of the system and/or the processed liquid PLASTIC MATERIAL Tmax (PVDF) VERTICAL CENTRIFUGAL PUMPS Kw HP Constructive form RPM Three-phase 400/690 V 50/60 Hz 2 poles Efficiency class Protection Ambient temperature Aluminium/Cast iron ATEX DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com

Open the catalog to page 1

The curves and performances refer to tested pumps, with water at 20 °C, two-pole motor 50 Hz (2900rpm). VERTICAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com

Open the catalog to page 2

IM 200 Specifications and types Length measurements in mm * Measurements may vary depending on the motor supplier. DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com VERTICAL CENTRIFUGAL PUMPS • EPDM • VITON® Seal o-ring materials • wooden cage - dimensions and weights vary depending on the length of the pump Accessories • FLANGE KIT (DIN standard - ANSI on request) • Customisable fixing plate only at the design stage

Open the catalog to page 3

IM 200

IM 200

Catalog excerpts

All DEBEM SRL catalogs and technical brochures