*mydirectindustry

IM 180

Product catalog summary

Specifications
The document provides detailed specifications for vertical centrifugal pumps, specifically the IMIM 180 model. The pumps are available in plastic materials such as PP and PVDF, with suction and delivery fittings of 2"1/2 f BSPP or DN 65 and 2" m BSPP or DN 50, respectively. The maximum flow rate is 75 m³/h, and the maximum head is 38 meters. The pumps can handle viscosities up to 500 cps and solids passing up to 11 mm in diameter. The standard electric motor is 11 Kw (15 HP), with a speed of 2900 RPM, operating on three-phase 400/690 V at 50/60 Hz, and is classified as efficiency class IE3 with protection IP55.

Operating Conditions
The pumps are designed to operate in ambient temperatures ranging from -30°C to +45°C. The standard column lengths range from 500 mm to 1250 mm, with corresponding weights for PP and PVDF materials. Operating temperatures for PP range from 0°C to +70°C, and for PVDF from -10°C to +100°C, with variations depending on system conditions and the processed liquid.

Performance Curves
The document includes performance curves for flow rate versus head, efficiency, and power consumption, tested with water at 20°C using a two-pole motor at 50 Hz (2900 RPM).

Model Variants
Various pump models are listed, ranging from IM 80 to IM 200, with motor power specifications from 0.37 Kw (0.5 HP) to 18.5 Kw (25 HP). The document provides detailed measurements for tank use and motor weight for each model.

Packaging and Accessories
Pumps are packaged in wooden cages, with dimensions and weights varying based on pump length. Seal o-ring materials include EPDM and VITON®. Available accessories include a flange kit (DIN standard, ANSI on request), PP and PVDF pump protection filters, and a customizable fixing plate at the design stage.

Catalog excerpts

IM 180 Specifications and types Suction fittings Delivery fittings Standard open impeller Solids passing * Special versions are available on request for the fluid pumped STANDARD ELECTRIC MOTOR: PP WEIGHT* PVDF WEIGHT* * The weights refer to the pump without the motor NB: Special executions only on request with column length from min. 400 mm to max. 1400 mm OPERATING TEMPERATURES**: PLASTIC MATERIAL PLASTIC MATERIAL PP (with glass additive) PVDF (with carbon additive) **Measurements should be taken with agitated water; temperatures may vary depending on the conditions of the system and/or the processed liquid Tmax (PVDF) DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com VERTICAL CENTRIFUGAL PUMPS Kw HP Constructive form RPM Three-phase 400/690 V 50/60 Hz 2 poles Efficiency class Protection Ambient temperature Aluminium/Cast iro

Open the catalog to page 1

The curves and performances refer to tested pumps, with water at 20 °C, two-pole motor 50 Hz (2900rpm). DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com VERTICAL CENTRIFUGAL PUMPS

Open the catalog to page 2

IM 180 Specifications and types Length measurements in mm * Measurements may vary depending on the motor supplier. Seal o-ring materials • EPDM • VITON® VERTICAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com Motor Power • wooden cage - dimensions and weights vary depending on the length of the pump Accessories • FLANGE KIT (DIN standard - ANSI on request) • PP pump protection filter* (*Filter sold separately) • PVDF pump protection filter* (*Filter sold separately) • Customisable fixing...

Open the catalog to page 3

IM 180

IM 180

Catalog excerpts

All DEBEM SRL catalogs and technical brochures