*mydirectindustry

IM 150

Product catalog summary

Specifications
The document provides detailed specifications for vertical centrifugal pumps, specifically the IMIM 150 model. The pumps are available in plastic materials such as PP and PVDF. Key specifications include suction fittings of 2"1/2 f BSPP or DN 65, delivery fittings of 2" m BSPP or DN 50, a maximum flow rate of 42 m³/h, and a maximum head of 24 m. The pumps can handle viscosities up to 500 cps and solids passing up to Ø max 2 mm. The standard electric motor is 4 Kw (5.5 HP) with a speed of 2900 RPM, operating on three-phase 230/400 V at 50/60 Hz, and is classified under efficiency class IE3 with protection IP55.

Operating Conditions
The pumps are designed to operate within ambient temperatures ranging from -30°C to +45°C. The standard column lengths vary from 500 mm to 1250 mm, with corresponding weights for PP and PVDF materials. Operating temperatures for PP range from 0°C to +70°C, while PVDF ranges from -10°C to +100°C. The document notes that these temperatures are based on measurements with agitated water and may vary depending on system conditions.

Performance Curves
Performance curves are provided for pumps tested with water at 20°C using a two-pole motor at 50 Hz (2900 RPM). The curves illustrate the relationship between head (m), flow rate (m³/h), efficiency (%), and power consumption (Np in KW).

Packaging and Accessories
The pumps are packaged in wooden cages, with dimensions and weights varying based on pump length. Available accessories include a flange kit (DIN standard, ANSI on request), PP and PVDF pump protection filters (sold separately), and a customizable fixing plate at the design stage. Seal o-ring materials include EPDM and VITON®.

Model Variants
The document lists various pump models from IM 80 to IM 200, with motor power ranging from 0.37 Kw (0.5 HP) to 18.5 Kw (25 HP). Each model has specific dimensions and weight, which may vary depending on the motor supplier.

Catalog excerpts

IM 150 Specifications and types Suction fittings Delivery fittings Standard open impeller Solids passing * Special versions are available on request for the fluid pumped STANDARD ELECTRIC MOTOR: PP WEIGHT* PVDF WEIGHT* * The weights refer to the pump without the motor NB: Special executions only on request with column length from min. 400 mm to max. 1400 mm OPERATING TEMPERATURES**: PLASTIC MATERIAL PLASTIC MATERIAL PP (with glass additive) PVDF (with carbon additive) **Measurements should be taken with agitated water; temperatures may vary depending on the conditions of the system and/or the processed liquid Tmax (PVDF) DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com VERTICAL CENTRIFUGAL PUMPS Kw HP Constructive form RPM Three-phase 230/400 V 50/60 Hz 2 poles Efficiency class Protection Ambient temperature Aluminium/Cast iro

Open the catalog to page 1

The curves and performances refer to tested pumps, with water at 20 °C, two-pole motor 50 Hz (2900rpm). DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com VERTICAL CENTRIFUGAL PUMPS

Open the catalog to page 2

IM 150 Specifications and types Length measurements in mm * Measurements may vary depending on the motor supplier. Materiali o-ring di tenuta Seal o-ring materials • EPDM • VITON® VERTICAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com Motor Power • wooden cage - dimensions and weights vary depending on the length of the pump Accessories • FLANGE KIT (DIN standard - ANSI on request) • PP pump protection filter* (*Filter sold separately) • PVDF pump protection filter* (*Filter sold separately)...

Open the catalog to page 3

IM 150

IM 150

Catalog excerpts

All DEBEM SRL catalogs and technical brochures