*mydirectindustry

IM 110

Product catalog summary

Specifications:
The document provides detailed specifications for vertical centrifugal pumps, specifically the IMIM 110 model. The pumps are available in plastic materials such as PP and PVDF, with suction fittings of 2" m BSPP or DN 50 and delivery fittings of 1"1/2 m BSPP or DN 40. The maximum flow rate is 20 m³/h, and the maximum head is 15 m. The pumps can handle viscosities up to 500 cps and solids passing up to Ø 6 mm. The standard electric motor is 1.1 Kw (1.5 HP), with a speed of 2900 RPM, and operates on a three-phase 230/400 V, 50/60 Hz system.

Operating Conditions:
The pumps are designed to operate within ambient temperatures of -30°C to +45°C. The standard column lengths range from 500 mm to 1250 mm, with corresponding weights for PP and PVDF materials. Operating temperatures for PP range from 0°C to +70°C, and for PVDF from -10°C to +100°C, depending on the column length.

Performance Curves:
The document includes performance curves for tested pumps with water at 20°C, using a two-pole motor at 50 Hz (2900 RPM). These curves illustrate the relationship between head, flow rate, efficiency, and power consumption.

Model Variants:
Various pump models are listed, ranging from IM 80 to IM 200, with motor power specifications from 0.37 Kw (0.5 HP) to 18.5 Kw (25 HP). Each model has specific dimensions and weight, which may vary depending on the motor supplier.

Accessories and Packaging:
The pumps come with optional accessories such as flange kits (DIN standard, ANSI on request), and pump protection filters in PP and PVDF. The packaging consists of a wooden cage, with dimensions and weights varying based on the pump length. Seal o-ring materials available include EPDM and VITON®.

Catalog excerpts

IM 110 Specifications and types Suction fittings Delivery fittings Standard open impeller Solids passing * Special versions are available on request for the fluid pumped PP WEIGHT* PVDF WEIGHT* * The weights refer to the pump without the motor NB: Special executions only on request with column length from min. 350 mm to max. 1400 mm OPERATING TEMPERATURES**: PLASTIC MATERIAL PLASTIC MATERIAL PP (with glass additive) PVDF (with carbon additive) **Measurements should be taken with agitated water; temperatures may vary depending on the conditions of the system and/or the processed liquid Tmax (PVDF) VERTICAL CENTRIFUGAL PUMPS Kw HP Constructive form RPM Three-phase 230/400 V 50/60 Hz 2 poles Efficiency class Protection Ambient temperature Aluminium/Cast iron Single-phase (up to 3 kw) ATEX DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com

Open the catalog to page 1

The curves and performances refer to tested pumps, with water at 20 °C, two-pole motor 50 Hz (2900rpm). DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com VERTICAL CENTRIFUGAL PUMPS

Open the catalog to page 2

IM 110 Specifications and types Length measurements in mm * Measurements may vary depending on the motor supplier. Seal o-ring materials • EPDM • VITON® VERTICAL CENTRIFUGAL PUMPS DEBEM srl - Via Del Bosco, 41 - 21052 Busto Arsizio (VA) Italy - Tel. +39 0331 074034 - Fax +39 0331 074036 - [email protected] - www.debem.com Motor Power • wooden cage - dimensions and weights vary depending on the length of the pump Accessories • FLANGE KIT (DIN standard - ANSI on request) • PP pump protection filter* (*Filter sold separately) • PVDF pump protection filter* (*Filter sold separately) • Customisable fixing...

Open the catalog to page 3

IM 110

IM 110

Catalog excerpts

All DEBEM SRL catalogs and technical brochures