*mydirectindustry

Catalogs
DE-STA-CO
Series 206

Series 206

Product catalog summary

Product Overview:
The Series 206 Horizontal Hold Down Clamps are designed with all stainless steel construction, providing good bar clearance under the clamping bar while maintaining a low profile. They are suitable for applications such as assembly, chemical processing, closures, and light-duty clamping. The series includes models 206-HSS and 206-SS, both featuring a flanged base and differing in bar height (high and low U-Bar respectively).

Technical Information:
Both models have a maximum holding capacity of 440 N (100 lbf) with a clamp bar and handle opening of 90°. The weight of each clamp is 0.03 kg (0.07 lb). Accessories supplied include a spindle assembly (205943) and flanged washers (105906). The clamps accommodate M4 or #8 spindle accessories.

Standard Clamp Dimensions:
The dimensions for the Series 206 clamps are provided in both millimeters and inches. Key dimensions include X (5 mm [0.20 in]), X1 (11 mm [0.43 in]), X2 (27 mm [1.06 in]), and Y (29 mm [1.14 in]). The holding capacity (HC) is 440 N (100 lbf) for the primary configuration and 220 N (50 lbf) for the secondary configuration. The exerting force (EF) to applied force (AF) ratios are 5:1 and 3:1 respectively.

Additional Information:
For further details on accessories and additional technical specifications, refer to page 8.1 and page 20.4 of the document.

Catalog excerpts

2.33 Horizontal Hold Down Clamps Series 206 Product Overview • All stainless steel construction • Offers good bar clearance under clamping bar while maintaining low profile • Light duty Also Available: Flanged Base Stainless Steel Flanged Base High U-Bar, Stainless Steel Series 206 Technical Information Dimensions and technical information are subject to change without notice CLAMPING TECHNOLOGY

Open the catalog to page 1

2 2010 Horizontal Clamping_Layout 1 8/24/12 12:25 PM Page 34 Horizontal Hold Down Clamps 2.34 Series 206 Holding Capacities Y EF EF HC 2 AF HC 1 X X1 X2 Model X X1 X2 Y ‡HC1 ‡HC2 SS/HSS [0.20] 5 [0.43] 11 [1.06] 27 [1.14] 29 [100lbf.] 440N [50lbf.] 220N ‡EF(X1):AF ‡EF(X2):AF 5:1 3:1 Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force Refer to page 20.4 for additional information. Series 206 Standard Clamp Dimensions -SS/-HSS [0.35] 8,8 [0.22] 5,5 [0.45] 11,5 OPENING M4 OR #8 IF SUPPLIED [1.06] 27,0 [0.31] 8,0 [0.76] 19,2 "HSS" [0.05] 1,2 [0.44] 11,3 "SS"...

Open the catalog to page 2

Series 206

Series 206

Catalog excerpts

All DE-STA-CO catalogs and technical brochures

Archived catalogs