Overview

This document details technical specifications, pin configurations, and mechanical data for a series of electrical connectors used in manual tool changers, focusing on the RDN-25 Series Disconnect Housings and various CPI connector models.

1. Dimensional Specifications

Physical dimensions are provided in millimeters with inch equivalents, covering connector sizes from approximately 6.2 mm (0.25 in) to 84.0 mm (3.31 in). Mounting features include two M5 fastener holes spaced 12.7 mm (0.50 in) apart, ensuring secure attachment of connectors.

2. Connector Types and Models

The document lists multiple connector models identified by codes such as CPI-RDB-M10P-A10, CPI-RDH-F10S-A10, CPI-RDB-M19P-B19, and others. These vary by pin count (3 to 19 pins), gender (male pin or female socket), and configuration side (A or B).

3. Pin Configurations

Detailed pin layouts are provided for each connector model, showing alphanumeric pin labeling and arrangement in rows and columns. Both A-side and B-side connectors have specific pin numbering schemes. Jumper settings are critical for certain socket connectors, with examples including:

• 5-pin socket connectors with pins 4 & 5 jumpered
• 4-pin socket connectors with pins 1 & 5 or 3 & 5 jumpered
• 3-pin socket connectors with pins 4 & 5 jumpered

4. Electrical Connections

Correct pin-to-pin matching between male and female connectors is emphasized to ensure proper electrical continuity. Jumper configurations are essential for maintaining intended circuit paths and must be applied as specified.

5. Mounting and Assembly

Connectors are mounted using M5 fasteners at two points spaced 12.7 mm apart. Mechanical features and mounting holes are standardized to facilitate secure and compatible installation.

6. Notes and Recommendations

• Connector selection depends on application requirements, considering pin count and configuration.
• Strict adherence to pin configuration tables is necessary to avoid miswiring.
• Jumper pins must be used only as specified for each connector variant.
• Mechanical dimensions and mounting hole placements follow standardized patterns for compatibility.
• Always consult the latest technical documentation as specifications may change without notice.

Summary Table of Key Connector Models

Note: This document serves as a reference for electrical pin assignments and connector mating configurations in industrial manual tool changer applications.