*mydirectindustry

ECOCUP

Product catalog summary

Overview: The EcoCup™ EC40 is an electric vacuum cup designed for efficient and clean operation in pick-and-place applications. It is particularly suitable for handling flat, rigid, non-porous parts such as plastic, glass, solar panels, and electronics.

Key Features:

Light-switch operation for ease of use.
Ultra-fast actuation with a time of 25 ms.
Noise-free operation, enhancing the working environment.
Easy installation and setup, reducing initial setup time.
Reduced maintenance costs due to its design.
Optional mounting to Scara robots for versatile applications.
Eliminated risk of air-borne contaminants as it operates without air.

Specifications:

Actuation Time: 25 ms
Temperature Range: 5° ~ 60°C [41° ~ 140°F]
Duty Cycle: 50% (½ On, ½ Off)
Voltage: 24 VDC
Current: 0.5 Amp
Weight: 0.12 kg [0.25 lb]
Cup Material: 45 Durometer Nitrile

Operating Instructions:

Set the cup on a smooth, flat surface of the part.
Apply 24VDC to Pins 3 and 4 on the M12 connector to create a vacuum.
Release voltage to release the part.

Performance:

Recommended Load: Less than 0.45 kg [1.0 lb]
Maximum Load: Up to 1.81 kg [4.0 lb] with longer movement times.

Connector Details:

M12 4-PIN (MALE) Connector: Pins 3 and 4 are used for voltage application.
M8 3-PIN (MALE) Connector: Used for additional configurations.

Mounting Options:

Optional Apple Core Mounting available.
Custom solutions available upon request.

Additional Information: The EcoCup™ EC40 is part of the EcoCup series, which emphasizes environmentally friendly and efficient vacuum solutions. The product is patent pending, and dimensions and technical information are subject to change without notice.

Catalog excerpts

ecocup series Vacuum Products | Product Overview, Technical Specifications, Dimensions EcoCup creates vacuum without AIR! Great for pick-and-place applications of flat, rigid, non-porous parts including: plastic, glass, solar panels, and electronics, as well as other consumer goods with smooth, flat surfaces. The EcoCup™ features: • Light-switch operation • Ultra-fast actuation • Noise-free operation • Easy installation and setup • Reduced maintenance costs • Easy optional mounting to Scara robots • Eliminated risk of air-borne contaminants No fittings, no valves, no hoses, no compressor, and absolutely no AIR! EcoCup™ EC40 Electric Vacuum Cup Assembly EcoCup™ EC40 Electric Vacuum Cup - Operation Holding Capacity Loads from 0.45kg [1.0 lb] up to 1.81kg [4.0 lb] max. may be used with longer movement times. (See chart in drawing area for greater detail). Operating Instructions: 1. Set cup on smooth, flat surface of part. 2. Apply 24VDC to Pins 3 and 4 on M12 connector. (Center of cup lifts, creating vacuum) 3. Release voltage and part is released. Dimensions and technical information are subject to change without notice

Open the catalog to page 1

ecocup Series Vacuum Products | Technical Specifications, Dimensions (CABLE PURCHASED SEPARATELY) [1.97] Ø50.0 M12 4-PIN (FEMALE) CONNECTOR W/ROTATING COUPLING CBORE for (CABLE PURCHASED SEPARATELY) M12 4-PIN (FEMALE) CONNECTOR W/ROTATING COUPLING EcoCup™ EC40 Electric Vacuum Cup Assembly Ø63.0 M8 3-PIN (MALE) CONNECTOR FACE VIEW 1: NOT USED 3: -0 VDC 4: +24 VDC EcoCup™ EC40 Optional Apple Core Mounting M8 3-PIN (MALE) CONNECTOR FACE VIEW 1: NOT USED 3: -0 VDC 4: +24 VDC M12 4-PIN (MALE) CONNECTOR FACE VIEW 1: NOT USED 2: NOT USED 3: -0 VDC 4: +24 VDC EcoCup™ EC40 M12 4-Pin Connector with Rotating...

Open the catalog to page 2

All DE-STA-CO catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list