- Catalogs
- DE LAMA S.p.A.
- De Lama: DLST-L - DHS Dry Heat Over for Sterilization and depyrogenation
De Lama: DLST-L - DHS Dry Heat Over for Sterilization and depyrogenation
De Lama: DLST-L - DHS Dry Heat Over for Sterilization and depyrogenation
- Capacity ranges from 150 to 8000 liters.
- Operating temperature is standard at 250°C, with an option to increase to 300°C using suitable filter packs.
- Constructed with AISI 304 or AISI 316L stainless steel, featuring fully welded chambers with rounded edges.
- Pass-through design with interlocked doors to prevent cross-contamination.
- Available with semi-automatic hinged doors or automatically sliding doors.
- Special double gasket door seal system (FDA approved) to prevent air release or cross-contamination.
- Bioseal flange ensures a barrier preventing particulate entry from maintenance areas.
- HEPA filters are installed on air intake, exhaust, and recirculation walls.
- Two fan groups for air circulation and cooling.
- Electrical or steam/electrical heating options.
- Chamber constant overpressure control via inverter on air recirculation fan.
- Adjustable heating ramp with internal humidity evacuation.
- Cooling by external fresh air flow, optionally enhanced through coil exchanger.
- Enhanced air distribution and temperature uniformity through exclusive deflector system.
- Clamp connections for validation activities and air quality monitoring.
- High-grade thermal insulation.
- Monitoring of chamber pressure and HEPA filter efficiency by differential pressure transmitters.
- Temperature monitoring inside the chamber by Pt 100 Ohm Class A EN 60751 sensors.
- Wide range of alarms and safety devices for operator protection and equipment operation.
- Available with magnetic doors suitable for isolator coupling and in class 10000.
- ISO 14001 certified environmental system.
- SCADA Windows OS control system, compliant with CFR 21-Part 11.
Catalog excerpts
DE LAMA ISO 14001 CERTIFIED ENVIRONMENTAL SYSTEM Process & Sterilization Solutions since 1949 High quality industrial oven to meet the widest requirements of the pharmaceutical industry for sterilization and depyrogenation by dry heat in full compliance with cGMP Guidelines and ISO MAIN FEATURES No-proprietary, high quality components Reduced environmental ISO 5 (Class 100) impact (open loop air heating Compliant with the current International standards SCADA Windows OS control system, CFR 21-Part 11 www.delama.it Discover all international certifications on: www.delama.it
Open the catalog to page 1
DESIGN, CONSTRUCTION & FUNCTIONAL FEATURES • capacity: from 150 lts. up to 8000 lts. • operating temperature: standard 250°C (up to 300°C with suitable filters pack) • chamber execution in AISI 304 or AISI 316L stainless steel fully welded, with rounded edges • pass-through execution for no crosscontamination with interlocked doors • semi-automatic hinged doors or automatically sliding doors • door seal system: special double gaskets system (FDA approved) to avoid any air release or cross-contamination between the chamber and the external environment • bioseal flange to seal the sterilizer into...
Open the catalog to page 2All DE LAMA S.p.A. catalogs and technical brochures
DLGS Steam Generators6 Pages
DLV-CAB SERIES2 Pages
- Management software solution
- Metal cart
- Automatic cleaning system
- Drying system
- Windows software
- Transport trolley
- Control software
- Water cleaning system
- Handling cart
- Industrial cleaning system
- Shelf trolley
- Air blast dewatering system
- Parts cleaning system
- Multipurpose cart
- Dewatering system for the food industry
- Retort
- Hot air dryer
- Solvent cleaning system
- Batch drying system
- Washing system for the food industry