Datasheet PLA

Product catalog summary

Overview: This document provides technical specifications and features of a high-grade PLA filament used in 3D printing. PLA, or Poly Lactic Acid, is a biodegradable plastic derived from renewable resources, known for its ease of use and low shrinkage factor, making it a popular choice for 3D printing.

Features:

Tougher and less brittle than regular PLA.
Easy to print at low temperatures.
Low warping and biodegradable.
Limited smell during printing.

Color Availability: Various colors are available, which can be checked on the manufacturer's website.

Storage Recommendations: Store in a cool, dry place (15-25˚C) away from UV light to enhance shelf life.

Filament Specifications:

Diameter: 1.75mm with a tolerance of ± 0.05mm and roundness ≥ 95%.

Material Properties:

Specific Gravity: 1.24 g/cc (ISO 1183).
Melt Flow Rate (MFR): 9.56 gr/10 min at 210°C / 2.16 kg (ISO 1133).
Yield Stress: 69.8 MPa (ISO 527).
Strain at Yield: 4.8% (ISO 527).
Strain at Break: 19.5% (ISO 527).
Tensile Modulus: 3120 MPa (ISO 527).
Impact Strength: 3.4 kJ/m² at 23°C (ISO 179).
Moisture Absorption: 1968 ppm (ISO 62).

Printing and Thermal Properties:

Recommended Printing Temperature: 220-240°C.
Melting Temperature: 77-146°C (ISO 11357).
Vicat Softening Temperature: 60°C (ISO 306).
Glass Transition Temperature: 57°C (ISO 11357).
Recommended Heated Bed Temperature: ±60˚C.

Catalog excerpts

ddclrcip PLA PLA is a tough, easy to use high grade PLA type of filament, ideal for 3D printing. Slightly modified, the filament retains the typical features of PLA, but makes it tougher and less brittle. Due to a low shrinkage factor PLA will not deform after cooling. Poly Lactic Acid is a biodegradable plastic made from renewable natural resources and one of the most popular materials for 3D printing. Features: • Tougher and less brittle compared to regular PLA • Easy to print at low temperature • Low warping • Biodegradable • Limited smell Colours: Check the website for available colours. Additional info: Recommended temperature for heated bed is ±60°C. Storage: Cool and dry (15-25°C) and away from UV light. This enhances the shelf life significantly. Logistiekweg 34 | 7007 CJ Doetinchem | The Netherlands | +31 (0)314-377050 | [email protected] | www.dddrop.com

Open the catalog to page 1

Datasheet PLA

Datasheet PLA

Catalog excerpts

All Dddrop catalogs and technical brochures