DCH-S series industrial remote control system has been used in many fields, such as concrete pump truck, construction machine crane and so on. The industrial remote control system has two independent parts, the receiver and the transmitter, and the working range is 100-150 meters. The emergency stop of the DCH remote control system includes the active stop (emergency stop instruction) and the passive stop (the transmitter battery power supply is insufficient or the power off, the signal is beyond the effective control range, the signal is disturbed and so on). The remote control system response...

Catalogue of joystick S Series 1. Transmitter 1.1 DCH S series main types are showed on below table sheet. TYPES DCH RADIO LIMITED COMPANY

Catalogue of joystick S Series 1.2 transmitter types parameters are as below: Type Dimension Weight inside or outside press start button for 2 seconds Emergency Housing Distance Work time ≥150 meters（open environment） Continuous working time: 40 hours (at room temperature) Charger time Joystick life： ≥2,000,000 times Signal / battery status customization function according to customer MAX 128 DI input (toggle/knob/rotate switch, button etc,.)+16 AI DCH RADIO LIMITED COMPANY

Catalogue of joystick S Series 2.Receiver DCH-S series receiver parameters are as belows. Also we support for any customization function for worldwide customer.          Housing： plastic/IP65 Temperature： -25℃~+70℃ Frequency： 433-434MHz Accessories: 4 shock pad installation LED：operation status / RF signal Output interface: connector or cable Optional function：more than one transmitters or receivers Power： 30-280VAC；57-528VAC; 9-18VDC ;18-36VDC; 36-72VDC; Output: DO/AO Relay, Modbus RS485,RS232,CAN,DeviceNet, Canopen,ProfibusDP ,PWM and others. Currently, we support below protocol output,...

Catalogue of joystick S Series 3.Special Function 3.1 one-to-two function Using a one-to-two function one transmitter can control two cranes and the control of each crane can be selected through the button switch on thetransmitter. Switch selection method: A A+B control A.B two crane at the same time B 3.2 two-to-one function Allow two or more operators to be equipped with one transmitter independently and use the same crane independently. The "takeover release" is independent of each other and does not interfere with each other. 1. gain the right to operate Start the C transmitter, select the...

Catalogue of joystick S Series 4.Remote control system installation operation 4.1 installation instructions The A series remote controller can be used in conjunction with all kinds of cranes. Please read this instruction before you install it for the first time. 4.2 installation attention Before installation, please turn off the total power of the crane and strictly prevent live installation. When there is a frequency converter near the receiver, the receiver must be more than 2 meters away from the frequency converter, or the receiver is installed in a shielded metal box, and the distance from...

Catalogue of joystick S Series 5. technical support maintenance and failure explanation We will provides customers with all kinds of detailed technical advice and after-sales service. 5.1. aftermarket service action time The company promises that the maintenance action time will not exceed twenty-four hours. The maintenance time of the remote control system for returning to our company does not exceed three working days. For remote control system that can not be repaired in time, the company can provide backup remote control system. The repair of the remote control system is completed to be replaced....

Catalogue of joystick S Series 6.1 remote control application The industrial remote control system is used to control the controlled system or controlled device remotely, to improve the convenience and efficiency of the control of the whole controlled system, and to improve the safety of the operator. 6.2 items of attention > Please read this instruction carefully before using the wireless remote control system and observe all safety precautions. >Only professional electricians can carry out drawings connection, and please connect them according to the attached drawings. >All modifications to...