DSR SERIES GAS OPERATED RADIANT HEATERS TECHNICAL DOCUMENTATION MANUFACTURER Daygas Heating Systems İnş. Tah. Ltd. Sti. Firuzköy Bulvarı No: 206, 34325 Avcilar / Istanbul 0 (850) 532 91 53 - 0 (212) 423 30 44 Avcilar VD. - 271079683

DSR Ceramic Radiant Series Specially designed Daygas ceramic stone with high radiance, effective and economical power in local heating analysis... » Technology from the sun. » All metal parts are high temperature resistant, long-lasting aluminum - silicon alloy. (Except reflectors.) » The cable assemblies in the device are fireproof silicone cable resistant to high temperatures. Ceramic Stones Special production Daygas ceramic stones are used in Daygas ceramic radiant devices. By choosing high-purity and high-quality cordierite, our infrared ceramic plate products of modern advanced science and...

DSR Ceramic Radiant Positioning Design Capacity selection is made based on the hanging heights of ceramic radiant heaters. In the positioning of the ceramic stone radiant devices whose type and capacity are selected, the scanning angle under the device is taken into account and the analysis is done. Since radiant devices heat with radiation, the one under the scanning angle is heated. Therefore, the regions outside the scanning angle cannot be heated. For example, in a cafeteria with 10 tables, there cannot be a scanning angle that appeals to all tables with 1 ceramic radiant (considering sma...

Application With Special Design Mounting Kit Let’s examine the DSR Industrial 12 stone ceramic radiant as an application example of a special design mounting foot. Specially designed feet are also available for mounting DSR Industrial ceramic radiants. » Devices can be mounted upside down (0°) with feet. » Specially designed legs that allow angled (from 10 to 65°) mounting It is produced as 30-50-75 and 100 cm. Angle-adjustable mounting can be made from both ends of the specially designed mounting feet. As seen in the example on the left; The devices can be mounted at an angle of 65 degrees from...

Application With Chain Suspension Chain etc. let’s examine the DSR Industrial 24 stone ceramic radiant as an example of installation application. If there is a beam where the devices will be hanged, it is recommended to fix it with a beam clamp. If there is no beam, steel dowels etc. can be fixed using. Angle Mounting Application DSR Industrial ceramic heaters, chain etc. It is suitable for mounting between 0 and 50° in suspension. * The ratio of chain lengths to each other should be check

Link chain should be used to hang radiant devices. The chain section diameter (d1) must be a minimum of 4 mm or greater and the material must comply with DIN5685 requirements. Use as interconnector S hook cross section diameter (d2) must be at least 4 mm or larger and comply with DIN5685 requirements. Stainless steel hook hole bolts should be used at the connection points of the chains to the device. M10 (metric 10) class full thread bolts should be used.

MANUFACTURER Daygas Heating Systems İnş. Tah. Ltd. Sti. Firuzköy Bulvarı No: 206, 34325 Avcılar / İstanbul 0 (850) 532 91 53 - 0 (212) 423 30 44 Avcilar VD. - 2710796836