FOAM XPS BOARD We supply a full range of equipment for foam board from 3/4 inch to 6 inches (20 to 150mm) thick, cut to size at any length. We work with several leading companies to integrate technology for cooling, conveying, and sizing of board material products. At A Glance • die and calibration systems available for the continuous extrusion Flat and shaping of foam boards used for temperature insulation. • Adjustment features are incorporated within the die and calibration unit to maintain uniform thickness with minimal edge trim. • Board die available for 24-inch (600mm) to 48-inch (1200mm) wide board. • Systems for many applications including ceiling tiles, insulation board, furniture padding, point-of-purchase displays, poster board, signage and more. Safety guarding may have been removed to better illustrate machine features. www.davis-standard.com

DAVIS-STANDARD FOAM BOARD SYSTEMS Primary Extruders • Single or twin saew Itiermotic® series extruders • Patented screw designs for foam • Dual T/C temperature control • Hydrocarbon & atmospheric blowing agents • Mass flow meter flow control • Dual gas blending systems Screen Changers • Slide plate and continuous styles available Melt Transfer Pipe • Spherical joints for thermal expansion Cooling Extruders • ^he^m(Itic*, series extruders • Self starting polymer sealing system • Spiral wrap barrels for extra cooling • Dual pass heater coolers • Low torque high output screws Closed Loop Cooling...