PIPE, PROFILE & TUBING SUPER BLUE® EXTRUDERS AT A GLANCE The high-performance, cost-competitive Super Blue® extruder model is engineered for custom profile and tubing applications as well as fiber, sheet, and basic wire and cable processes. Advantages of this design include double reduction gearboxes with helical carburized gears, an integral high capacity thrust bearing, cast iron feed section, bimetallic barrel and heated clamp arrangement, DSBM-T™ barrier mixing feedscrew, integrated control cabinet, and digital speed and meters. • Rugged design that is easy to maintain and energy efficient. • Increased torque capacity to handle high viscosity resins. • Supported by a three-year warranty and variety of DSB® barrier screw designs. • 24:1 models are available in 2-inch (50mm), 2 ½-inch (63mm), 75mm, 3 ½-inch (90mm), 100mm, and 4 ½-inch (114mm). 30:1 models are available in 3 ½-inch (90mm), 100mm, and 4 ½-inch (114mm). P: 860-599-1010 | 1 Extrusion Drive | Pawcatuck, CT 06379 | www.davis-standard.com Copyright 2014 Davis-Standard, LLC

SUPER BLUE® EXTRUDERS Maximum Barrel Operating Warranty 3 Year j 3 Year 3 Year j 3 Year j 3 Year j 3 Year j 3 Year j 3 Year j 3 Year DRIVE UNIT AC drive and power unit is engineered for a range of polymer requirements. Molded notch V-belt technology enables positive transmission of power from the motor to the gear reducer. GEAR REDUCER Double-reduction helical gearing is simple and durable. Unique built- in circulatory lubricating system supplies the gear mesh, all radial tapered roller bearings, and integral assembled thrust bearing. The thrust shaft is mounted on pre-loaded radial bearings...