SPECIALTY At A Glance KILLION HPE ADJUSTABLE EXTRUDER • Designed for coextrusion applications. • Extruder swivels on column to permit positioning at any angle. Vertical adjustment is accomplished by means of a lift screw. • All sliding/swiveling components can be locked firmly in place for rigid position. • Available in 3/4-inch (20mm), 1-inch (25mm), 1 1/4-inch (30mm), 1 1/2-inch (40mm), and 1 3/4-inch (45mm) sizes. • Base features swivel castors to allow for easy positioning of the machine. www.davis-standard.com The Killion HPE Adjustable extruder from Davis-Standard, LLC exemplifies processor demands with a small footprint, performance features, and a fast delivery for coextrusion and multilayer applications. This extruder is available in sizes ranging from 3/4 inch (19mm) to 1 3/4 inches (44mm), utilizes a direct drive motor versus belts and sheaves, and has a smaller footprint for close proximity to the common die.

KILLION HPE ADJUSTABLE EXTRUDER cont. www.davis-standard.com © 2007 Davis-Standard, LLC. All Rights Reserved. MACHINE DESIGN PARAMETERS Model HPE-075H HPE-100H HPE-125H HPE-150H HPE-175H Nominal Screw L/D Ratio 24:1 24:1 24:1 24:1 24:1 Screw Diameter ¾ “ (20mm) 1” (25mm) 1¼” (30mm) 1½” (40mm) 1 3/4” (45mm) Standard Drive Size (hp) 3 5 7.5 15 20 AGMA HPE Rating @ 100 RPM with Unity (1.0) S.F. 6 6 21 42 42 Resultant Service Factor 2.1 1.25 2.8 2.8 2.1 Thrust Bearing L10 Life (hrs) @ 5,000 psi and 100 screw RPM 2,500,000 370,000 186,000 570,000 200,000 Max Internal Pressure (psi) 10,000 10,000 10,000...