PIPE, PROFILE & TUBING HPE HORIZONTAL EXTRUDER AT A GLANCE The HPE Horizontal extruder from Davis-Standard, LLC exemplifies processor demands with a small footprint, performance features, and a fast delivery for coextrusion and multilayer applications. This extruder is available in sizes ranging from 3/4 inch (19mm) to 1 3/4 inches (44mm), utilizes a direct drive motor versus belts and sheaves, and has a smaller footprint for close proximity to the common die. • High quality design and manufacture. • Increased torque capacity to handle high viscosity resins. • A ll sliding/swiveling components can be locked firmly in place for rigid position. • Available in 3/4-inch (20mm), 1-inch (25mm), 1 1/4-inch (30mm), 1 1/2-inch (40mm), and 1 3/4-inch (45mm) sizes. • Adjustment of + or – 1/2-inch (13mm). P: 860-599-1010 | 1 Extrusion Drive | Pawcatuck, CT 06379 | www.davis-standard.com Copyright 2014 Davis-Standard, LLC

Heat Zone Data MACHINE DESIGN PARAMETERS Model Nominal Screw L/D Ratio Screw Diameter Standard Drive Size (hp) AGMA HPE Rating @ 100 RPM with Unity (1.0) S.F. Resultant Service Factor Thrust Bearing L10 Life (hrs) @ 5,000 psi and 100 screw RPM Max Internal Pressure (psi) Machine Weight (lbs) Barrel Zones Barrel Zone Wattage Die/Adapter Zone Wattage Standard Voltage DRIVE UNIT FEED SECTION & HOPPER EXTRUDER SCREW The AC drive and power unit is designed to handle the typical range of polymer requirements. A direct-coupled motor provides efficient transmission of power to the gear reducer. The drive...