*mydirectindustry

Elastomer Overview

1 / 2 PagesView full catalog

Elastomer Overview

Product catalog summary

Elastomer Overview

Applications include industrial and architectural seals, tire components, gaskets, hoses, silicone products, medical tubing, insulation products, sports industry pre-forms, and gear pumps.

Features

Manufacture of single and coextrusion systems for the rubber industry.
Systems include a range of elastomer extruders such as multipurpose, hot and cold feed, silicone, vacuum vented, pin barrel, smooth barrel, and custom designs.
Additional equipment includes extrusion heads, custom feedscrew designs, curing systems, laboratory and downstream equipment, integrated process control systems, and turnkey systems.

Features and Benefits

Variety of system configurations with single and twin screw extruders or gear pumps.
Extruders available in sizes from 1 ½-inch to 10-inch barrel diameters with L/D ratios up to 20:1.
Design advantages include quick clamp disconnect, multi-zone temperature control, patented pneumatic feed roll design, and various gearbox configurations.
Gear extruders offer energy savings, minimal residence time, and high-pressure pumping at low temperatures.
Applicable in various markets including adhesives, automotive, construction, medical, and more.

Pin Barrel Extruders

Designed with multiple rows of custom pins for compound mixing.
Equipped with drilled heating and cooling passages for efficient heat transfer.
Features replaceable liners and two-piece pins rated at 6,000 psi.

Smooth Barrel Extruders

Features a wear-resistant liner of iron/boron bimetallic material.
Designed for operating pressures up to 10,000 psi.
Multi-zone temperature control with cast aluminum heater/cooler halves.
Cast-in serpentine heater rods and cooling tubes maintain consistent temperature to prevent thermal bending.

Catalog excerpts

ELASTOMER OVERVIEW OVERVIEW We manufacture both single and coextrusion systems for the rubber industry. Systems are available with a range of elastomer extruders including multipurpose, hot and cold feed, silicone, vacuum vented, pin barrel, smooth barrel and custom designs, as well as gear extruders. We also supply extrusion heads, custom feedscrew designs, curing systems, laboratory and downstream equipment, integrated process control systems, and complete turnkey systems. Industrial & Architectural Seals Tire Components Gaskets, Weather Stripping Hoses Silicone Products Medical Tubing & Pre-Forms Insulation Products Pre-Forms for Sports Industry Gear Pumps/Straining Applications P: 860-599-1010 | 1 Extrusion Drive | Pawcatuck, CT 06379 | www.davis-standard.com Copyright 2014 Davis-Standard, LLC

Open the catalog to page 1

ELASTOMER OVERVIEW FEATURES AND BENEFITS Variety of System Configurations variety of feed devices including single and twin screw A extruders or gear pumps. Large Extruder Selection Extruders are available in 1 ½-inch (38mm) to 10-inch (254mm) barrel diameters with L/D ratios up to 20:1. Design Advantages Extruders include quick clamp disconnect, multi-zone temperature control, a patented pneumatic feed roll design, single, double and triple reduction gearboxes, and a common base configuration. Efficiency ur gear extruders improve energy savings, and provide O minimal residence time and high...

Open the catalog to page 2

Elastomer Overview

Elastomer Overview

Catalog excerpts

All Davis Standard Extrusion Systems catalogs and technical brochures

Archived catalogs