3 LAYER STRETCH HOOD LINE OVERVIEW The Davis-Standard Stretch Hood manufacturing system features a 3-layer Vertex IBC die used in conjunction with the Triple Lip Air Ring to produce the hoods at high rates and excellent gauge control. The Triple Lip Air Ring features automatic profile control and an elevator system used in tune with a high volume IBC stack on the die. The oscillating haul-off uses gussets with auto adjustment and the SLC winder is used for producing large diameter rolls. The line can be configured to run other FFS films and products as well for versatility. KEY FEATURES ■ DSB screws for superior processing of resin mix providing excellent melt homogeneity ■ MAC 30:1 smooth bore extruders for dependability ■ Vertex die provides high IBC air volume exchange for increased outputs ■ Triple Lip Air Ring provides high cooling rate ■ Easily changeable die lips provide exact BuR control for different size markets ■ AutoProfile control is critical to ensure highest tolerances are achieved ■ Oscillating nip includes shallow gusset assembly and extra long collapsing for improved bubble collapsing and reduction of wrinkles ■ SLC surface winder

3 LAYER STRETCH HOOD LINE TECHNICAL PROPERTIES OF LOW STRETCH HOOD LINE CONFIGURATION Applications Materials Bricks, tiles, cement, sand Mono - EVA, LLD, mLLD Material Handling Blending system including vacuum loading Puncture, environmental Extrusion MAC 30:1 smooth bore extruders DSB barrier screws TECHNICAL PROPERTIES OF MEDIUM STRETCH % Stretch Applications Materials Resin, chemicals, beverages Coex - EVA, LLD, mLLD, POP Die & Air Ring Vertex multi layer stationary IBC die with Triple Lip Air Ring Auto profile package with oscilating gauge Holding force, clarity Tower Equipment Bubble sizing...