The spray valve DAS 90 is designed to obtain micro-spraying of various types of fluid. Its very compact size makes a great solution when the mounting space is limited, while its precision allows for repeatable and consistent dosages in time. Model Drive Weight Max fluid pressure Actuating air pressure Atomizing air pressure Type inlet air Type inlet fluid Air cap Speed Adjusting the passage Used materials Fluids to be dispensed FIELDS OF APPLICATION: > Lubricants micro-spraying > Primers micro-spraying > Water based paints spraying FEATURES: > Fine adjustment of the flow rate > Needle and nozzle in stainless steel > Operation mode normally closed with safety spring > Micro-spray on parts with minimum size of 4-5 mm > Do not create mist or unwanted drips > Easy maintenance and cleaning of the valve. DAS 90 Single acting 310g Max 10 bar 5 - 7 bar from 0.1 to 3 bar 6x4mm Tube 6x4mm Tube For round spray Up to 200 cycles / min Micrometric Stainless steel, nickel-plated brass Oil, lubricants, water based paints, primers, inks (need to be tested)

TANKS FOR FLUID FEEDING The PT series DAV Tech tanks are ideal to feed in the best way the valve DAS 90. They are available in 3 sizes 2, 5 and 10 liters and in different variations. Made of mirror polished stainless steel and aluminum, all tanks can be equipped on request with an electrical minimum level sensor. DRIVE THE VALVE DAS 90 The valve DAS 90 have to be drived with a 3/2 solenoid valve, timed by the customer. The atomizing air, necessary for the spraying,have to be drived with another 3/2 solenoid valve with a precision pressure regulator mounted on the line. This allows to keep separate...