MANUALSPRAY VALVE DAS 200 Via S. Pio X 6/a 36077 Altavilla Vicentina (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 [email protected] www.davtech.it FIELDS OF APPLICATION: > Oil and lubricants manual spray > Release agents manual spray > Grease and lubricants manual spray (HP Version) The manual spray valve DAS 200 is designed to spray various kind of fluids. The ergonomic handgrip and is weight make it very easy to handle and use, and the operator can focus on the process. The valve DAS 200 can be equipped with various kind of extensions to have anytime the right dispensing result. > Micro-metric fluid passage adjusting > Stainless steel needle and nozzle > Simple and economic > Available in HP version, for pressure up to 25 bar > Available many kind of extensions, also for radial spray. Model Drive Weight Fluid pressure Atomizing air pressure Air inlet Fluid inlet Air cap Fluid adjustment Materials Fluids to be dispensed DAS 200 Manual 240g Max 4 bar (standard version) Max 25 bar (HP version) 0,5 - 6 bar Tube 6x4mm Tube 6x4mm (standard version) - Fitting % gas (HP version) Tube 6x4mm Micrometric Stainless steel and aluminium Oil, lubricants, release agents, grease and pasty products (HP Version)

HP VERSION DAS 200 valve, in its high pressure version, is able to spray pasty products as grease ( until NLGI 2 grade) or other lubricants paste. This version allow to have a cheap and easy-to-handle manual gun, to replace manual brushes, with a professional result. DAS 200 EXTENSIONS The radial extensions are perfects to reach holes and remote areas, such o-ring seat, various sized holes etc. In this way will be possible to dispense in a fast and reliable way a ring of fluid on the walls of the hole. Connection diagram PRESSURIZED TANK PRESSURE REGULATOR Ci riserviamo di modificare in qualsiasi...