SPRAY VALVE DAS 100 k. Via Ravizza, 30 36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 [email protected] www.davtech.it The spray valve DAS 100 is designed to spray various types of fluid. This valve allows to obtain very high performance combined with an extreme robustness and simplicity of construction. The spray caps are available in various shapes, depending on the effect required, while various nozzle diameters are adapted to the viscosity of the used fluid. FIELDS OF APPLICATION: > Lubricant spraying > Primer spraying > Vinylic glue spraying > Water based paint spraying FEATURES: > Fine adjustment of the flow rate (optional) > Nozzle and needle in stainless steel > Operation mode normally closed with safety spring > Micro-spraying on parts with minimum size of 10 mm > Do not create mist or unwanted drips > Easy maintenance and cleaning of the valve. Model Drive Weight Max fluid pressure Drive pressure Atomizing air pressure Air input type Inlet fluid type Air cap type Speed Adjusting the passage Used materials Fluids to be dispensed DAS 100 Single acting 430 g Max 10 bar 5 - 7 bar From 0.1 to 3 bar 6x4mm hose 6x4mm hose Oval or round Up to 200 cycles / min Micrometric or with screw and nut Stainless steel, nickel-plated brass Oil, lubricants, primers, Vinylic glue

TANKS FOR FLUID FEEDING The PT series DAV Tech tanks are ideal to feed in the best way the valve DAS 50. They are available in 3 sizes 2, 5 and 10 liters and in different variations. Made of mirror polished stainless steel and aluminum, all tanks can be equipped on request with an electrical minimum level sensor. AIR CAPS AND SPRAY NOZZLES Depending on the fluid, the spray nozzles are available in various diameters from 0.3 to 1.5 mm, while the air caps allow to obtain a round or oval spray pattern. DRIVE THE VALVE DAS 100 The valve DAS 100 have to be drived with a 3/2 solenoid valve, timed by...