Sensors

Sensors

Product catalog summary
Technical Specifications
  • Flow Sensor: Measures liquid flow, specifically oil, with a minimum flow rate reading of 10 mm³/stroke. Operates at 8-28 VDC with an M12x1 connector. Output signals include NPN 2A N.O. and PNP 0.7A N.O. Maximum flow pressure is 7 bar, suitable for mediums with viscosity between 32-220 Cst. The sensor is made from stainless steel AISI 304 and Nylon 66F35VO, with wetted parts in stainless steel 17-4PH. It offers an accuracy of +/- 0.5% and a response time of less than 1 ms. It can be mounted in any position and detects pressure from 0-10 bar to 0-300 bar depending on the model.
  • Air Bubbles Detector: Utilizes ultrasound technology to detect air bubbles in tubes without direct contact with the liquid. It is sensitive to bubbles with a minimum size of 1/3 of the tube's internal diameter. The response time is adjustable from 0.5 ms. It supports pipe sizes of 3-8 mm or 8-17 mm and operates with a power supply of 12-30 VDC, consuming a maximum of 50 mA.
  • Pressure Sensor for High Viscosity Fluids: Designed for accurate pressure control in circuits with high-reactivity fluids like silicones. It provides output signals of 0-10Vdc or 4-20mA, depending on the model. The reading range varies from 0-10 to 0-300 bar.
Company Information

DAV TECH SRL is located at Via Ravizza, 30, 36075 Montecchio Maggiore (VI) - ITALY. Contact details include phone: 0039 0444 574510, fax: 0039 0444 574324, email: [email protected], and website: www.davtech.it.

See more

Catalog excerpts

Sensors-1

DAV TECH SRL Via Ravizza, 30 36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 DAV TECH PROCESS SENSORS [email protected] www.davtech.it FLOW SENSOR Technical Data DAV Tech offers the possibility to monitor the passage of liquid products, such as oil, using a special flow sensor. The signaling of the passage occurs via a reed switch activated by a magnet, located on a piston moved by the pressure of the fluid in transit. The sensor measures a minimum pass of 10 mm ³. Minimum flow rate reading Power Connector Output signals Max Flow Pressure Mediums Input / Output thread AIR BUBBLES DETECTOR The detector allows to highlight the presence of an air bubble inside a tube without contact between the detector and the liquid. Using the technology of ultrasound is possible to control this important parameter of the process even in presence of aggressive fluids such as primers, glue, thread lockers etc. The sensor is available in 2 sizes to accommodate various sizes of pipe. Technical Data Reading Air bubbles sensitivity Response time Pipe size Connector Power supply Consumption Ultrasound Technology Reading with minimum size equal to 1/3 of the internal diameter of the tube Adjustable from 0.5 ms 3-8 mm or 8-17 mm M12 3-wire 12…30 VDC Max 50 mA PRESSURE SENSOR FOR HIGH VISCOSITY FLUIDS The pressure sensor with diaphragm allows you an accurate control of the pressure changes within the circuit, even when dispensing products with a high reactivity such as silicones. The sensor, depending the model chosen, can provide an output signal 0-10Vdc or 4-20mA and is supplied complete with connector. You can also choose the reading range, which is available in various sizes from 0-10 to 0-300 bar. Technical Data Housing material Stainless steel AISI 304, Nylon 66F35VO Material wetted parts Response time Mounting position Detectable pressure Depending on the model from 0-10 bar to 0-300 bar Ci riserviamo di modificare in qualsiasi momento, senza preavviso, le caratteristiche tecniche, le dimensioni ed i pesi indicati nel presente catalogo. Le illustrazioni non sono impegnative.

 Open the catalog to page 1

All DAV TECH Srl catalogs and technical brochures

  1. Brochure GP

    4  Pages

  2. Brochure 2K

    4  Pages

  3. Utilities

    1  Page

  4. Hoses

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.