DAV TECH SRL Via Ravizza, 30 36075 Montecchio Maggiore (VI) HYDRAULIC PRESSURE REDUCER AND CARTRIDGE HOLDER DAV TECH HYDRAULIC PRESSURE REDUCER When a pneumatic pump is used to feed a product is necessary to stabilize all the variations of pressure that the pump goes to create during its operation. The pressure regulator has a dual role in a dispensing system: on the one hand allows to reduce the pressure to a set value, on the other eliminates the pulse and pressure fluctuations. The pressure regulator is supplied complete with mounting bracket and with a maximum inlet pressure of 300 bar allows (depending on the models) to obtain a stabilized output pressure between 10-60 bar, 20-120 or 30-180 bar bar. At the exit of the reducer you can install a pressure gauge or a digital pressure switch to set it easily and check the good functioning. Outlet pressure range 10-60 bar 20-120 bar [email protected] www.davtech.it CARTRIDGE HOLDER To use sealants or other products contained in cartridges of 310 or 330 cc you can insert thecartridge in the special cartridge holder made in aluminum and pressurize it. Special fittings are available from stock, designed to be mounted using the special threads of the most popular brands of sealants. The cartridge holder can then be equipped with a sensor that controls the consumption of the cartridge and sends an alarm once the consumption of product has passed a certain level. FIELDS OF APPLICATION: > Feeding of sealants and fluids on 310-330 cc cartridges. FEATURES: > Anodized aluminum body > Screwed cap for an easy load/ unload of the cartridge > On request available with aluminum fixing with low level sensor > Adapters for M15-M21 cartridges available on stock > Special seal to avoid air leaking. We reserve the right to modify at any time, without notice, the specifications, dimensions and weights in this datasheet. The illustrations are not binding.