Catalog excerpts
The PDP volumetric pumps are a innovative, compact, vesartile, precise and reliable 2k dispensing systems. The specially designed rotary auger pump allow high performances dispensing for 2k material. The system provide an efficient and consistent dispensing more than any other piston or gear pump system. Mix ratio and dispensing volume can be easily adjusted through the controller, changing speed and rotation of the rotor. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or filling a determinated volume with the highest accuracy, without be affected from inlet fluid pressure, viscosity and temperature of the media. FIELD OF APPLICATION: > 2K fluid dispensing OPTIONS: > Pressure check system on pump outlet to monitor unwanted catalization in the mixing area. > Possibility to use pumps of different size together to be close to the requested ratio. FEATURES: > Many sizes to allow the perfect choice for any application > Dispensing not affected by temperature and viscosity changes > Simple maintenance due to the design of the pump > Possibility to have special features such as body in PEEK, rotor in Ceramic, stator in PA etc. > Possibility to dispense filled materials without wearing problems > Suck back function to prevent any dripping Dosing Flow Rate (Max.) Accuracy of dosing Mixing Ratio Stator Material Material Inlet Port Material Outlet Port Wetting Part Material Operating Condition ~ 3.6 mil/min ~ 12 mil/min ~ 36 mil/min ~ 120 mil/min ~ 240 mil/min Inert Elastomer Inert Elastomer Inert Elastomer Inert Elastomer Inert Elastomer SUS / UHMW - PE / FKM 3 SUS / UHMW - PE / FKM 3 SUS / UHMW - PE / FKM 3 SUS / UHMW - PE / FKM 3 SUS / UHMW - PE / FKM 3 1O—4O°C 1O—4O°C 1O—4O°C 1O—4O°C 1O—4O°C 1. Different inlet, such as syringe fitting, possible upon request - 2. Different outlet possible upon request - 3. Different mater
Open the catalog to page 1PRINCIPLE OF FUNCTIONING The two pumps are drived by the controller that automatically, after setting the requested ratio, calculate speed and accelleration of the single pumps to have not only a perfect proportioning but also the contemporaneity of the two fluids dispensing. The mixing block, avalilable in various shape and with different sizes, allow the using of static mixers of various size. The single pump outlet pressure monitoring system (option) allow to check any kind of unwanted catalization in the mixing block or in the static mixer, making stronger the dispensing process. STATIC...
Open the catalog to page 2All DAV TECH Srl catalogs and technical brochures
-
DA 1000 V Controller
1 Pages
-
DAS Smart Controller 2000
1 Pages
-
DAV Smart Controller 2000
1 Pages
-
DA Smart Controller 2000
1 Pages
-
GP2K Controller
1 Pages
-
PDP Controller
1 Pages
-
GP Controller
1 Pages
-
PCP Controller
1 Pages
-
Systems for integration
15 Pages
-
Smart solutions for dispensing
12 Pages
-
PCP Controller - Basic
1 Pages
-
Company profile
12 Pages
-
DA1000V - Volumetric system
16 Pages
-
PCP and PDP volumetric pumps
4 Pages
-
Gear Volumetric Pumps GP
4 Pages
-
METERING VALVE DAV 400
2 Pages
-
DA 400 MAN needle valve
1 Pages
-
Automations
16 Pages
-
Pressurized Tanks
2 Pages
-
DA 250 - diaphragm valve
2 Pages
-
DA 500 - needle valve
2 Pages
-
DA 400 - needle valve
2 Pages
-
Follower Plate pump PP-50
1 Pages
-
Follower plate pump PP-25
1 Pages
-
LIGHTING
4 Pages
-
PCP volumetric pumps
2 Pages
-
Utilities
1 Pages
-
Thermo heated hoses
1 Pages
-
Sensors
1 Pages
-
Grease degassing system
1 Pages
-
Fluids compatibility
2 Pages
-
Metering valve DAV 600
2 Pages
-
Metering valve DAV 300
2 Pages
-
Metering valve DAV 200
2 Pages
-
Spray valve DAS 200
2 Pages
-
Metering valve DAV 800
2 Pages
-
Follower plate pump PP1-5
1 Pages
-
Micro spray valve DAS 30
2 Pages
-
Digital dispenser DA 1000 T
1 Pages
-
Spray valve DAS 90
2 Pages
-
Spray valve DAS 100
2 Pages
-
Metering valve DAV 400
2 Pages
-
Follower plate pump PP-200
1 Pages
-
Hoses
1 Pages