metering valve with hand-grip dav 200 man dav tech srl Via Ravizza, 30 36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 [email protected] www.davtech.it The metering valve DAV 200 MAN is designed to dispense manually, but with the highest accuracy and repeatability greases and lubricants up to NLGI 3 (until 1,000,000 mPa s). The ergonomic hand-grip make the valve simple to keep in hand and operate. The volumetric chamber has a capacity adjustable from 10 to 200 mm 3 (0.01 to 0.2 cc) and with a special sensor is possible to check the emptying of the dosing chamber, for the highest control of the assembly process. > Greases manual metering > Lubricants manual metering Model Operation mode Weight Fluid pressure inlet Quantity dispensable Actuating air pressure Inlet air Inlet fluid thread Outlet fluid Speed Adjusting the amount dosed Used materials Fluids to be dispensed FEATURES: > Volumetric dosing, reliable and constant > Dosing independent of viscosity, pressure and temperature of the lubricant > Ergonomic, compact and lightweight (230 g) > Dosing objectivable with a sensor > Quantity dispensed easily adjustable and that can’t be changed accidentally using the block screw > Integrated pneumatic valve in the handgrip > Available on request in version for low feed pressure. DAV 200 MAN Double Acting 230 g 20 bar Min - Max 200 bar (low pressure version available) 10 mm3 - 200 mm 3 (0,01 cc - 0,20 cc) 5 - 7 bar 0 4mm hose 1/8 BSP M5 threaded with luer lock holder or fitting 1/8 BSP female Up to 60 cycles / min Micrometric with block screw Stainless steel, anodized aluminum Greases and lubricants up to NLGI 3-1000000 mPa s

FEEDING PUMPS FOR GREASE DAV Tech pumps are ideal to feed grease and lubricants,contained in cans or drums, to the valve DAV 200 MAN. Pumps are available for cans from 0.5 up to 5 kg and for 5 to 200 kg drums. NOZZLES FOR VALVE DAV 200 MAN The valve DAV 200 MAN is equipped with luer lock nozzle holder or alternatively with a threaded nozzle 1/8 BSP female. We can also design and build special nozzles (multi-point, radial, etc.) to meet the customer needs. DRIVE THE VALVE DAV 200 MAN The valve DAV 200 MAN have to be kept constantly fed with air at a pressure between 5 and 7 bar. The pneumatic...