DAV TECH SRL Via Ravizza, 30 36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 [email protected] www.davtech.it > Grease metering > Pasty products metering The metering valve DAV 600 is designed to dispense with the highest accuracy and repeatability greases and pasty products.The chamber has a volumetric capacity adjustable from 0,1 to 3,0 cm3 and with a special sensor is possible to check the emptying of the dosing chamber, for the highest control of the assembly process. FEATURES: > Volumetric dosing, reliable and constant > Dosing independent of viscosity, pressure and temperature of the lubricant > Pressure control system not necessary > Dosing objectivable with a sensor > Quantity dispensed easily adjustable and that can’t be changed accidentally using the block screw > Anodized body. Model Operation mode Weight Fluid pressure inlet Quantity dispensable Actuating air pressure Inlet air Inlet fluid thread Outlet fluid Speed Adjusting the amount dosed Used materials Fluids to be dispensed DAV 600 Double Acting 650 g Min 10 bar - Max 150 bar 0,1 cm3 - 3,0 cm3 5 - 7 bar 1/8 gas 1/8 gas 1/8 gas Up to 40 cycles/min Mechanic stopper with sensor holder Stainless steel, anodized aluminum Greases and lubricants and pasty products

FEEDING PUMPS FOR GREASE DAV Tech pumps are ideal to feed grease and lubricants,contained in cans or drums, to the valve DAV 400. Pumps are available for cans from 0.5 up to 5 kg and for 5 to 200 kg drums. NOZZLES FOR VALVE DAV 600 The valve DAV 600 is equipped with threaded outlet 1/8 BSP female, where is possible to fit any kind of nozzle. We can also design and build special nozzles (multi-point, radial, etc.) to meet the customer needs. DRIVE THE VALVE DAV 600 The DAV 600 valve have to be controlled by 5/2 solenoid valve. It is not necessary that the timing is accurate, but it is important...