DAV TECH SRL Via Ravizza, 30 36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 GREASE DEGASSING SYSTEM In many application, the entrapment of air bubbles in the fluid can cause a dangerous non accuracy of the dispensing system. The DAV Tech degassing system solve this problem, with a preprocessing of the grease, before its use on the assembly line, eliminating the air bubbles in the lubricant. The system is supplied with a PLC that allow to adjust the mixing speed and the process time, checking the depression and all the other parameters. The system is available in 2 sizes, for 1 to 5 kg tins and 25 to 50 kg drums. [email protected] www.davtech.it FIELDS OF APPLICATION: > ils and greases degassing, for O the highest dispensing accuracy > e-homogenization of the fluid in R case of parts separation FEATURES: > Off-line process, so made in hide time > Available for drums between 1 and 50 kg All the operations are guided by and HMI display which give a fast recognition of the status of the system. DAV Tech degassing systems are very useful in case is needed to transfer from a big drum to some smaller one the fluid, to remove the air bubbles that usually are created. We reserve the right to modify at any time, without notice, the specifications, dimensions and weights in this datasheet. The illustrations are not binding. > Adjusting processing time > Adjusting mixing speed.