DAV TECH SRL Via Ravizza, 30 36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 E-2K 200 / E-2K 400 PRE-FILLED TWIN CARTRIDGES DISPENSER E-2K 200/400 are volumetric dispensing systems, created to dispense accurate amounts of 2k resin, in 2k pre-filled 200 ml or 400 ml cartdridges The system, managed trough a dedicated controller, with touch screen color display, allow to dispense in a reliable and consistend way, dots or beads of 2k resins, and to make controlled potting cycle A controlled motor, with encoder and closed loop management, extrude with adjustable amount and flow the 2 cartridges. Trough a suck back function, is possible to avoid any residual pressure inside the cartridges, allowing a fast stop of the flow. The system is developed to be mounted on a fixture, to be moved by a robot or an XYZ system, or to be hanged to a reaction arm. [email protected] www.davtech.it FIELDS OF APPLICATION: > k Epoxy, poliuretanic or siliconic 2 resin dispensing > MMA adhesive dispensing > Structural bonding adhesive dispensing FEATURES: > Volumetric dispensing, with amount and flow that can be setted with controller > No change of the dispensed amount due to viscosity change > Automatic management of the purges with adjustable pot life timer > Cartridges low level monitoring with adjustable alarm > Dispensing process management with closed loop to achieve the highest control level > Possibility of interface with external PLC Technical datas Cartridge size Controller Size Controller Weight 7” color touch screen Software Languages We reserve the right to modify at any time, without notice, the specifications, dimensions and weights in this datasheet. The illustrations are not binding.