The diaphragm valve DA 250 is designed to dispense in a controlled, precise and repeatable way, low to medium viscosity fluids such as anaerobic adhesives (thread locker and coaxial blockers), cyanoacrylate glues and other aggressive fluids. The particular design of the valve make the fluid during the dispensing only comes into contact with the body in PTFE and with the membrane that opens and closes the passage, thus preventing contamination and clogging. Model Drive Max fluid pressure Operating pressure Thread inlet Thread outlet Speed Adjustment Used materials Fluids used FIELDS OF APPLICATION > Anaerobic glues > Cyanoacrylate glues > Aggressive fluids FEATURES: ___ > Micrometric adjustment of the flow rate > Fluid in contact only with PTFE and inert materials > Operation normally closed with safety spring > Anodized aluminum body > Ability to operate simple or doubleacting > Easy maintenance and cleaning valve > Membrane co-molded with a useful life of more than 10 million cycles DA 250 Simple or Double Acting 10 bar 5-7 bar 1/8 BSP Luer Lock or others on request Up to 200 cycles / min Micrometric screw adjustment Anodized aluminum, stainless steel, PTFE, membrane co-molded with non-reactive materials Cyanoacrylate glue, anaerobic fluids, low viscosity fluids in general (even aggressive)

TANKS FOR FLUID FEEDING The DAV Tech PT tanks are ideal to feed the valve DA 250. They are available in 3 sizes 2, 5 and 10 liters and in different variations. The tank PT2.0 in particular is designed to accommodate inside the 250 cc oval containers used by the major manufacturers of anaerobic fluids such as Loctite and Loxeal. DRIVE VALVE DA 250 The valve 250 DA have to be drived by solenoid 5/2 or 3/2 (depending on whether you want to work double-acting or simple acting) for a time setted by the PLC of the customer. We are available for the supply of timing systems such as the DA 1000 T controller...