DAS 50 / DAS 50 N SPRAY VALVE DAV TECH SRL Via Ravizza, 30 36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 Fax 0039 0444 574324 [email protected] www.davtech.it The spray valve DAS 50 and DAS 50N are designed to dispense radially without contact fluids such as oils, lubricants, primers etc. inside cylinders, holes, chambers etc. The special construction prevent leaking and avoid formation of fume or mist. The valve dispense a crown at 360° inside the cylinder, without contaminating other areas, while by moving the valve is possible to lubricate an hole in all its length. FIELDS OF APPLICATION: > Non contact radial dispensing of low to medium viscosity fluids FEATURES: > Fine adjustment of the flow rate > Extension nozzles available in standard length 15, 20, 30, 50, 100, 200 mm (possibility to create special ones) > Operation mode normally closed with safety spring > Works with cylinders,holes etc from i.d. 10 mm to i.d. 120 mm > Avoid any mist and dripping > Easy maintenance and cleaning of the valve. Model Drive Weight Max fluid pressure Actuating air pressure Atomizing air pressure Input type air Inlet type fluid Extension length Speed Adjusting the passage Used materials Fluids to be dispensed

TANKS FOR FLUID FEEDING The PT series DAV Tech tanks are ideal to feed in the best way the valves DAS 50 and DAS 50N. They are available in 3 sizes 2, 5 and 10 liters and in different variations. Made of mirror polished stainless steel and aluminum, all tanks can be equipped on request with an electrical minimum level sensor. DRIVE THE VALVES DAS 50 AND DAS 50N The valves DAS 50 and DAS 50N have to be drived with a 3/2 solenoid valve, timed by the customer. The atomizing air, necessary for the spraying,have to be drived with another 3/2 solenoid valve with a precision pressure regulator mounted...