Catalogs >
Datum Electronics >
M425 TORQUE TRANSDUCER

M425 TORQUE TRANSDUCER
4Pages

Catalog excerpts

DATUM ELECTRONICS M425 TORQUE TRANSDUCER PRODUCT OVERVIEW

2 M425 TORQUE TRANSDUCER DATUM ELECTRONICS 2 M425 TORQUE TRANSDUCER DATUM ELECTRONICS SPECIFICATIONS M425 PERFORMANCE INFORMATION For signal output options including Ethernet, MODBUS, USB, RS485/232 and 4 analogue channels configured 4-20mA (4-12-20mA): +/-10Vdc, +/-5Vdc, 0-10Vdc or 0-5Vdc, refer to Document 1013 Daum Universal Transducer Interface. Document: 1012 Issue: 5 Date: 03/08/2016

Open the catalog to page 2

Body length Overall F Body length H length Overall length Model F Total E H size mass Kgs Exposed shaft length Exposed shaft length Keyway depth off centre Spline width Output module height Output module height Output module length Output module length This drawing and its associated design is the property of Datum Electronics Ltd. and may not be copied or used for any purpose other than that for which it is supplied, without the express written authority from Datum Electronics Ltd. Side *Does not comply with (BS 4235-1: 1972) M425 Specifications DATUM ELECTRONICS M425 TORQUE TRANSDUCER 3

Open the catalog to page 3

ALTERNATE CONNECTION OPTIONS The M425 is compatible with a variety of other universal interfaces or indicators by correct cable and PIN configuration. This allows direct connection to their user software and customers own software. See page 7 of the M425 handbook for a guide to wiring connector configuration. The M425 will also accept configuration commands to enable connection to legacy Datum Electronics interfaces and indicators. When set in compatibility mode the M425 can be used with Torque Log Software, the Datum Electronics type 300 and Type 370 Indicators and the Type 400150 USB /...

Open the catalog to page 4

M425 TORQUE TRANSDUCER 4Pages

Catalog excerpts

All Datum Electronics catalogs and technical brochures

M425 TORQUE TRANSDUCER
4Pages