Dispensing of adhesives and sealants

The information in this catalogue was checked with utmost care for correctness. However, no liability can be accepted for any incomplete or faulty information. We reserve the right to make changes for the purpose of further technical development. Status: September 2014 © 2014 DATRON AG. All richts reserved.

DATRON Accessories for Dispensing Systems Increase your effectiveness with DATRON accessories The exceptionally high dispensing quality, which is achieved independently of traverse speeds, is the essential feature of DATRON’s dispensing systems. Their programming, their sensors, the variety of applications and materials as well as significantly different “set-up times” are decisive for cost-effectiveness. Therefore DATRON develops powerful accessories: for effective and thus profitable work. Many of the components shown here are the result of long-standing experience in process-safe working with...

Table of Contents Page DATRON Accessories for Dispensing Systems Individual Consulting and Order 7 – 18 External Gear Pumps External Gear Pumps (large) Internal Gear Pump Fluid Plus Pumps (external gear pumps) Micro Pumps Eccentric Screw Pumps Adapter Dispensing Needles Dispensing Heads DATRON Systems Overview

Individual Consulting and Order Our team in the field of dispensing is made up by a group of specialists who will be happy to recommend adequate dispensing solutions and production parameters. Order hotline: +49(0) 6151-14 19 - 136 Do you know what you are looking for? Simply let us have your order by phone. If you call before 3 p.m. we will ship it on the same day! E-Mail ordering: [email protected]

External Gear Pumps DATRON’s pumps for medium to high viscosity media Due to its compact and precise design, it is suitable for pumping medium to high viscosity, filled and unfilled materials. The cleaning process is as simple and fast to perform as the replacement of the plastic gears. Disassembly of the entire pump from the dispensing head is done without any need for tools. ■■ Pump for rotating needles: for dispensing shaped beads. It can be used with angled dispensing needles, but only in combination with a special drive for rotary needles. ■■ External gear pump with wear insert: For dispensing...

Accessories for external gear pumps Order Description Article Number Dispenser gear Z5 POM red, unfilled media Gears for medium to high viscosity, unfilled media Order Description Article Number Dispenser gear Z9 POM blue, for filled media Gears for medium to high viscosity, filled media up to 50 µm particle size Order Description Article Number Adapter 5/16-28 UN for male Luer-lock Thread 5/16-28 UN and male Luer-lock outlet Order Description Article Number O-Ring 25 x 2, FPM 75 Shore, brown O-Ring 25 x 2, EPDM 80 Shore, violet O-Ring 11 x 2, FPM 80 Shore, brown O-Ring 11 x 2, EPDM 80 Shore,...

External Gear Pumps (large) DATRON’s pumps for medium to high viscosity media Due to its compact and precise design, it is suitable for pumping medium to high viscosity, filled and unfilled materials. The cleaning process is as simple and fast to perform as the replacement of the plastic gears. Disassembly of the entire pump from the dispensing head is done without any need for tools. Technical Data Capacity Viscosity range Pumping gear wheels Hard-coated Aluminium Input connection Output connection External radius pumps (large) Pump housing for 5 mm gears AlMgSi0,5, hard-coated Order Description...

Accessories for external gear pumps (large) Order Description Article Number Dispenser gear Z5 POM white, unfilled media Gears for medium to high viscosity, unfilled media Order Description Article Number Adapter 5/16-28 UN for male Luer-lock Thread 5/16-28 UN and male Luer-lock outlet Order Description Article Number O-Ring 25 x 2, FPM 75 Shore, brown O-Ring 25 x 2, EPDM 80 Shore, violet O-Ring 11 x 2, FPM 80 Shore, brown O-Ring 11 x 2, EPDM 80 Shore, violet O-Ring 8 x 2, FPM 80 Shore, brown O-Ring 8 x 2, EPDM 80 Shore, violet The colour coding is used to distinguish the different O-ring materials....

Internal Gear Pumps DATRON’s pumps for low to high viscosity unfilled media DATRON’s internal gear pump is a high-precision gear pump designed for pumping low to high viscosity, unfilled media. Due to its precise design, it has good suction abilities and pulsation-low dispensing with a wide range of speeds. Technical Data Capacity Viscosity range Pumping gear wheels Hardened steel Input connection Output connection Order Description Article Number Internal gear pump 0.06 ccm IZP-5954 Internal gear pump 0.30 ccm IZP-4002 Internal gear pump 0.60 ccm IZP-4004 Internal gear pump 0.06 ccm IZP-5954,...

Accessories for internal gear pumps Order Description Article Number Adapter 1/8“ NPT for male Luer-lock Adapter G1/8“ for male Luer-lock, stainless steel Thread 1/8” NPT and male Luer-lock outlet Thread 1/8” and male Luer-lock outlet Order Description Article Number O-Ring 26 x 1 NBR 70° Shore, black O-Ring 26 x 1 EPDM 70° Shore, violet O-Ring 26 x 1 FPM 80° Shore, brown O-Ring 6 x 1,5 EPDM 70 Shore, violet O-Ring 6 x 1,5 FPM 70 Shore, brown O-Ring 6 x 1, FPM 75 Shore, brown O-Ring 6 x 1, EPDM 80 Shore, violet Sealing ring 1/8" Hard PVC Copper sealing ring 1/8" (alternative to 1/8“ sealing ring)...

Hot Melt Pumps DATRON‘s pumps for hot melts High-precision, heatable gear pump made of high chromium alloy corrosionresistant steel for all common hot melt adhesives and reactive hot melt adhesives. Due to its special design, it operates quietly and with low pulsations in a wide range of speeds. The special shaft seal with buffer fluid prevents the penetration of air moisture into the pumping chamber, thus avoiding an undesired reaction of the material inside the pump. The hot melt pump is used for unfilled, low to high viscosity and heatable media up to a temperature of 180° C. Technical Data...