ELECTRONIC AND CONTROL PROCESS DEVICES “P.D.S. SERIES”: temperature and signal transmitters and converters for DIN rail mounting The P.D.S. (programmable by dip-switches) series transmitters and converters can accept on their input signals coming from 2 or 3 wires Pt100. Thermocouple and Strain Gauge sensors or Voltage and Current signals. • Single and double channel 4÷20 mA two wires transmitters for Pt100 input without galvanic isolation (DAT2065, DAT2066) • 4÷20 mA two wires transmitter for Thermocouple input without galvanic isolation (DAT2045) • Single and double channel converters for Pt100 input with configurable output as voltage or current without galvanic isolation (DAT2165, DAT2166) • Isolated converter for Pt100 input with configurable output as voltage or current (DAT2061) • Converter for Thermocouple input with configurable output as voltage or current without galvanic isolation (DAT2145) • Isolated signal converters with configurable input and output as voltage or current (DAT5020. DAT5021, DAT5023I, DAT5023V) • Isolated signal splitter with configurable input and output as voltage or current (DAT5022) • Isolated signal converter for Strain Gauge input with configurable output as voltage or current (DAT5025) INDEX 30 • DAT 2065 Dip Switch Configurable transmitter for Pt100 Double channel Dip Switch Configurable transmitter for Pt100 Dip Switch Configurable converter for Pt100 Double Channel Dip Switch Configurable converter for Pt100 Isolated Dip switch configurable converter for Pt100 Not linearized Dip Switch configurable transmitter for thermocouple Not linearized Dip Switch configurable converter for thermocouple Dip Switch configurable 3 ways isolated signal converter 3 ways isolated Dip Switch configurable signal converter 4 ways isolated Dip Switch configurable signal converter/signal splitter Dip Switch configurable converter for AC current signal Isolated converter for DC current signal with fixed input, and Dip Switch configurable output Dip Switch configurable converter for AC / DC voltage signal Isolated programmable Dip Switch converter for Strain Gauge / Bridge sensors

P.D.S. Temperature and signal transmitters series and converters, isolators, signal splitters

DIP SWITCH CONFIGURABLE TRANSMITTER FOR PT100 GENERAL DESCRIPTION The transmitter DAT 2065 is designed to provide on its output a linearised 4÷20 mA current loop signal proportional with the temperature characteristic of the Pt100 sensor connected on its input. It is possible to connect on the input both 3 wires and 2 wires Pt100. FEATURES - Configurable Input for Pt100 - Good accuracy and performance stability - Configurable by DIP-switches - 4 to 20 mA linearised output on current loop - Unit of measure configurable in °C or °F - EMC compliant – CE mark - DIN rail mounting in compliance with...

DIP SWITCH CONFIGURABLE CONVERTER FOR PT100 GENERAL DESCRIPTION The converter DAT 2165 is designed to provide on its output a linearised voltage or current signal proportional with the temperature characteristic of the Pt100 sensor connected on its input. It is possible to connect on the input both 3 wires and 2 wires Pt100. FEATURES - Configurable Input for Pt100 - Good accuracy and performance stability - Configurable by DIP-switches - Linearised voltage or current output - Unit of measure configurable in °C or °F - EMC compliant – CE mark - DIN rail mounting in compliance with EN-50022 and...

ISOLATED DIP SWITCH CONFIGURABLE CONVERTER FOR PT100 GENERAL DESCRIPTION The converter DAT 2061 is designed to provide on its output a linearised voltage or current signal proportional with the temperature characteristic of the Pt100 sensor connected on its input. It is possible to connect on the input both 3 wires and 2 wires Pt100. - Galvanic isolation at 2000 Vac between input / output and power supply - Good accuracy and performance stability - EMC compliant – CE mark - DIN rail mounting in compliance with EN-50022 and EN-50035 E n er g y Application areas POWER SUPPLY Power supply voltage...

NOT LINEARIZED DIP SWITCH CONFIGURABLE CONVERTER FOR THERMOCOUPLE GENERAL DESCRIPTION The converter DAT 2145 is designed to provide on its output a voltage or current signal linear and proportional with the value of voltage generated from the thermocouple connected to its input. The DAT 2145 doesn’t execute the linearisation of the input signal; this feature allows to use the converter with acquisition systems with an internal linearisation software. FEATURES - Configurable Input for thermocouples type K, J, R, S and T - Good accuracy and performance stability - Configurable by DIP-switches -...

3 WAYS ISOLATED DIP SWITCH CONFIGURABLE SIGNAL CONVERTER GENERAL DESCRIPTION - Galvanic isolation at 2000 Vac between input, power supply and output - Good accuracy and performance stability - EMC compliant – CE mark - DIN rail mounting in compliance with EN-50022 and EN-50035 Application areas POWER SUPPLY Power supply voltage Rever. polarity protection Aux. Power Supply OUT Operative temperature Storage temperature Voltage output Current output Load resistance (Rload) TEMPERATURE & HUMIDITY Input Calibration Thermal drift Full Scale Response time (from 10 to 90 % of f.s.) (*) = inclusive of...

DIP SWITCH CONFIGURABLE CONVERTER FOR AC CURRENT SIGNAL GENERAL DESCRIPTION The converter DAT 5023Iac is designed to detect the TRMS value of the AC current signal from 0÷5 A to 0÷60 A applied on its input providing a voltage or current output signal. The user can program the input and output ranges by the proper DIP-switches available after opening the suitable door located on the side of device. The regulation of Zero and Span values is made by the ZERO and SPAN potentiometers located on the top of device. The 2000 Vac isolation between power supply and output eliminates the effects of all...

DIP SWITCH CONFIGURABLE CONVERTER FOR AC / DC VOLTAGE SIGNAL GENERAL DESCRIPTION - Input for AC/DC voltage signal - Dedicated measure inputs - Input type of measure ( AC / DC ) configurable by DIP-switches - True Root Mean Square (TRMS) measure - Isolated power supply source for passive loads on output - Voltage or current output configurable by DIP-switches - Galvanic isolation at 1500 Vac between input, power supply and output - Good accuracy and performance stability - EMC compliant – CE mark - DIN rail mounting in compliance with EN-50022 and EN-50035 B Self-extinguishing plastic Rever. polarity...