Catalog excerpts
ELECTRONIC AND CONTROL PROCESS DEVICES “DAT6000 SERIES”: A/D interface modules for PLC The DAT6000 series devices are an evolution in the connection techniques of the analog signals to the PLC. Each device amplify, linearise, filter and isolate the analog signal coming from the sensors on field and convert it in an high resolution 16 bits length “word” digital signal that is transferred to the PLC by the data line of the controller. The data transfer is controlled by the PLC trough a clock signal generated on its digital port; at each pulse of clock is transferred a bit of the data. By few and simple instructions the PLC is able to acquire more analog signals on a single digital input. Moreover each module has an Enable signal, that allows the controller to multiplexing more devices to one data line and one clock signal. INDEX 74 • DAT 6011 A/D interface for PLC 2 input channels for mV or Tc A/D interface for PLC 2 input channels for RTD, Res 75 • DAT 6013 A/D interface for PLC 2 input channels for V, mA DAT 6021 A/D interface for PLC 4 input channels for mV, Tc A/D interface for PLC 4 input channels for +/- 20 mA A/D interface for PLC 4 input channels
Open the catalog to page 1DAT6000 A/D interface modules SERIES for PLC
Open the catalog to page 2A/D INTERFACE FOR PLC 2 INPUT CHANNELS FOR mV OR Tc GENERAL DESCRIPTION The devices of the DAT6000 series are an evolution in the techniques of connection of analog signals to PLC. The devices of this series amplify, linearise, isolate, filter and convert the analog signals coming from various sensors in a high resolution. The digital signal can be connected to any input of the PLC. FEATURES - Acquisition of analogue signals on PLC's digital I/O - Analogue input to any PLC or micro PLC - Up to 16-bit resolution with Full Scale high accuracy - 2 input channels - Configurable input for...
Open the catalog to page 3®DAlEXEL GENERAL DESCRIPTION The devices of the DAT6000 series are an evolution in the techniques of connection of analog signals to PLC. The devices of this series amplify, linearise, isolate, filter and convert the analog signals coming from various sensors in a high resolution. The digital signal can be connected to any input of the PLC. FEATURES - Acquisition of analog signals on PLC's digital I/O - Analog input to any PLC or micro PLC - Up to 16-bit resolution with Full Scale high accuracy - 2 input channels - Configurable input for ± 10 V and ± 20 mA Power supply voltage 18 .. 30 Vdc...
Open the catalog to page 4A/D INTERFACE FOR PLC 4 INPUT CHANNELS FOR +/- 20 mA GENERAL DESCRIPTION The devices of the DAT6000 series are an evolution in the techniques of connection of analog signals to PLC. The devices of this series amplify, linearise, isolate, filter and convert the analog signals coming from various sensors in a high resolution. The digital signal can be connected to any input of the PLC. FEATURES - Acquisition of analog signals on PLC’s digital I/O - Analog input to any PLC or micro PLC - Up to 16-bit resolution with Full Scale high accuracy - 4 input channels - Configurable input for ± 20 mA -...
Open the catalog to page 5ELECTRONIC AND CONTROL PROCESS DEVICES “DAT6000 SERIES” A/D interface modules for PLC Application areas
Open the catalog to page 6All DATEXEL SRL catalogs and technical brochures
-
DAT6021
2 Pages
-
DAT6023-I
2 Pages
-
DAT6023-V
2 Pages
-
DAT9550
3 Pages
-
DAT 10000
16 Pages
-
DAT 8000
16 Pages
-
DAT3000
14 Pages
-
DAT9000
8 Pages
-
DAT1000
6 Pages
-
CATALOG TRIP AMPLIFIERS
6 Pages
-
CATALOG DATEXEL
113 Pages
-
Datexel CATALOGO P.D.S._ING
10 Pages
-
Datexel CATALOGO SLIM SERIES_ING
10 Pages
-
NEW GENERAL CATALOGUE
113 Pages
-
Company Profile
19 Pages