*mydirectindustry

Leaflet of DT1102 V

Product catalog summary

Overview: The DT1102 V is a freely configurable galvanic isolator designed for signal isolation and conversion between a signal source and processing unit. It features three-way isolation for input, output, and power supply, with a continuous isolation voltage of 250 VACeff.

Specifications:

Input Ranges: Current (-25 mA to +25 mA), Voltage (-2.5 V to +2.5 V, -125 V to +125 V).
Output Ranges: Current (0 to 22 mA), Voltage (0 to 10.5 V).
Power Supply Options: 24 V ± 10% DC or 230 V ± 10% AC/DC.
Non-linearity: < 0.01%.
Temperature Coefficient: < 25 ppm/°C typically.

Features:

Freely configurable inputs/outputs via USB port.
Galvanic isolation between input, output, and power supply.
LED indicators for power supply and error conditions.
TS-35 rail mounting with a 12.5 mm width DIN rail housing.

Technical Specifications:

Input Resistance: 1.1 Mohm for Uin1, 1 Mohm for Uin2.
Output Resistance: >5 Mohm for current output, <0.2 ohm for voltage output.
Settling Time: 250 ms (90%), 300 ms (99%).
Operating Temperature: 0–60 °C or -20 to +60 °C upon request.
EMC Compliance: EN 61326-1, Group 1, Class B noise emission.

Safety and Compliance:

Isolation complies with EN 61010-1 standards.
Pollution Level: 2, Measurement Category: II.
Protection: IP 20.

General Information:

Dimensions: 12.5 × 99 × 115 mm.
Weight: 0.15 kg.
Housing Material: Polyamide PA6.6.
Connection: Pluggable screw-terminal, cable size 0.25–2.5 mm².

Catalog excerpts

Type Designation Product features Freely configurable input/output galvanic isolator • freely configurable inputs/outputs via USB port • -125 – +125 V / -2,5 – +2,5 V / -25 – +25 mA input ranges • 0–22 mA / 0–10,5 V output ranges • 3 way isolation (input/output/power supply) • non-linearity: < 0.01% • temperature coefficient: < 25ppm / °C typ. • 24 V ± 10% DC, 230 V ± 10% AC/DC power supply • TS-35 rail mounting, 12.5 mm width DIN rail housing 24 VDC POWER SUPPLY 230 V AC/DC POWER SUPPLY The freely configurable galvanic isolator DT1102 V... provide galvanic isolation and signal conversion between the signal source and the signal processing unit. Both the input and output signal levels - via USB port - can be adjusted freely within the specified ranges. The DT 1102 V has three-way isolation, i.e. the input, output and power supply are galvanically isolated from each other. Continuous isolation voltage is 250 VACeff. The device has three inputs: • current: -25 mA – +25 mA* • voltage: -2,5 V– +2,5 V* • voltage: -125 V– +125 V*, and two outputs: • current: 0 – 22 mA* • voltage: 0 – 10,5 V*. * only one input and output can be used at the same time The device can be ordered with two types of power supply: • DT1102 V: 24 V ± 10% DC, • DT1102 V PS: 230 V ± 10% AC/DC The transmission characteristics are exceptionally good: non-linearity < 0.01%, temperature factor < 25 ppm / °C typically. The input and output signal levels can be freely configured via the USB port. The configuration program can be freely downloaded from the www.datcon.hu website after registration. The USB port is galvanically isolated from the device, so the PC can be connected to the device even during operating conditions. The LED indicators on the front panel provide information on the presence of power supply and possible error conditions. H-1148 Budapest, Fogarasi út 5., Hungary Tel.: +361 460-1000 Fax: +361 460-1001 e-mail: datcon@datco

Open the catalog to page 1

Safety data: Detailed information see in operating instructions. The Manufacturer maintans the right to change the technical data! ©DATCON H-1148 Budapest, Fogarasi ut 5., Hungary IPARI ELEKTRONIKAI KFT Tel.: +361 460-1000 Fax: +361 460-1001 e-mail: [email protected] www.datcon.eu

Open the catalog to page 2

Leaflet of DT1102 V

Leaflet of DT1102 V

Catalog excerpts

All Datcon Industrial Electronics Ltd. catalogs and technical brochures

Archived catalogs