17 VDC / 18 VDC transmitter supply Non-linearity < 0.01% Temperature-coefficient < 50 ppm / °C 19-29 VDC supply voltage TS-35 rail mounting, 12.5 mm width The safety data of 17 VDC / 18 VDC transmitter-supply significantly differ! The DT1300 ... Intrinsically Safe Isolators / Power Supplies provide signal transmission between transmitters operate in zone 0, zone 1 potentially explosive area and the signal processing units operate in the safe area. The DT1300 ... family galvanically isolate the input, the output and the power supply. The intrinsically safe input signal may be 0-20 mA, 4-20 mA, 0-10 V, the output signal also may be 0-20 mA, 4-20 mA, 0-10 V. The isolators available with two different transmitter supplies (17 VDC or 18 VDC). The safety data these two types differ considerably from each other, thus they can be flexibly matched to the various transmitters. The transmission parameters of the isolators are outstandingly good: the non-linearity is < 0.01% and the temperature coefficient is < 50 ppm / °C. The supply voltage range is 19-29 VDC, thus the isolators are insensitive to the supply voltage change. H-1148 Budapest, Fogarasi ut 5., Hungary ® DATCON IPARI ELEKTRONIKAI KFT. Tel.: +361 460-1000 Fax: +361 460-1001 e-mail: [email protected] www.dat

Safety data: The connection terminals of the supply voltages are isolated from each other, the isolation is in compliance with the standard EN 61010-1, taking into consideration the following: Intrinsical safety data: Input parameters: Input signal: Input resistance (current input): Input resistance (voltage input): Overdrive: Transmitter power supply: Output parameters: Output type: Burden (current output): Load (voltage output): Non-linearity: Temperature-coefficient: Supply-voltage effect: Response time: Galvanic isolation: Operating isolation voltage: Test voltage: Power supply: Supply voltage:...