SCM5B Catalog
72Pages

2024 Catalog SCM5B Products Isolated Analog Signal Conditioning Products High-Voltage Attenuator System Instrument Class Industrial Electronics

ISOLATED ANALOG SIGNAL CONDITIONING PRODUCTS - SCM5B

ISOLATED ANALOG SIGNAL CONDITIONING QUICK PRODUCTS SELECTION - SCM5B GUIDE Characteristic Mechanical Format Isolation: Voltage type Modular Plug-in-board Modular Plug-in-board Modular Plug-in-board Plug-in or Hockey Puck Software Configurable Software Configurable Output Range to System Output Range to Field Auto Zero, Auto Cal NMR (60Hz) Rejection Bandwidth Filter Input Voltage Withstand Input Signals Gain/Offset Adjust Output Control Always Enabled Always Enabled Supply Voltage Dimensions (h)x(w)x(d) Interface Customization DIN-rail, Head-mount Products - DSCA, DSCT, DSCL, DSCP...

ISOLATED ANALOG SIGNALQUICK CONDITIONING SELECTION PRODUCTS GUIDE CONTINUED - SCM5B High-accuracy Energy Monitoring Module Data Acquisition (DAQ) System - MAQ20 Phase Voltage Range Standard Industrial Buses Phase Frequency Electrical System Single-phase (2-wire) Voltage Measurement Three-phase Wye or Delta (3-wire) Three-phase Wye or Delta (4-wire) Current Measurement Shunt, Ct, Rogowski Coil Measured Parameters and Accuracy Components - Analog Input - MAQ20-MVDN, -VDN, -VSN, -IDN, -ISN, -FREQ, -BRDG1, -JTC, -KTC, -RSTC, -TTC, -RTD31, -RTD41, -ISOI1, -ISOMV1, ISOV2, -ISOV2, -ISOV3, -ISOV4,...

ISOLATED ANALOG SIGNALQUICK CONDITIONING SELECTION PRODUCTS GUIDE CONTINUED - SCM5B High-voltage Attenuator Modules - SCMHVAS-Mxxxx Input Range Input Voltage (max) Input Resistance Output Range Output Resistance Mechanical Dimensions (h)x(w)x(d) Environmental Operating Temp. Range Storage Temp. Range Relative Humidity *Contact factory or you local Dataforth sales office for maximum values. See Discontinued Devices at the End of the Document. www.dataforth.com ©1984-2024 Dataforth Corporation, All Rights Reserved ISO9001:2015-Regi

ISOLATED ANALOG SIGNAL CONDITIONING PRODUCTS - SCM5B RoHS III Isolated SCM5B Analog Signal Conditioning Products FEATURES • ±0.03% Accuracy (typ) • ±0.005% Linearity • 1500Vrms Transformer Isolation and 240Vrms Field-side Protection • ANSI/IEEE C37.90.1 Transient Protection • 5V Power Supply Voltage (30mA (typ)) • 4- to 6-pole Low-pass Filtering • Up to 160dB CMR • 95dB NMR at 60Hz, 90dB at 50Hz • ±1μV°C Drift Dataforth Corporation offers cost-effective, isolated industrial signal conditioning modules. The SCM5B analog modules are form, fit, and functional equivalents to similar products...

LINEARIZED 4-WIRE RTD-INPUT MODULES, 0 to +5V OUTPUT†, 4Hz BW Part No. Suffix NONE D NONE D C E B ANALOG VOLTAGE-INPUT MODULES, NARROW BANDWIDTH, 4Hz BW INPUT RANGE OUTPUT RANGE INPUT RANGE OUTPUT RANGE † www.dataforth.com ©1984-2024 Dataforth Corporation, All Rights Reserved ISO9001:2015-Registered QMS STRAIN GAUGE INPUT MODULES WIDE BANDWIDTH, 5V OUTPUT†, 10kHz BW OUTPUT MODEL INPUT EXCITATION RANGE† SCM5B38-01 SCM5B38-02 SCM5B38-03 SCM5B38-04 SCM5B38-05 SCM5B38-06 SCM5B38-07 ±10mV Full Bridge Input, (3mV/V) ±30mV Full Bridge Input, (3mV/V) ±10mV Half Bridge Input, (3mV/V) ±30mV Half...

ISOLATED ANALOG SIGNAL CONDITIONING PRODUCTS - SCM5B SCM5B Selection Guide (Continued) † GENERAL PURPOSE INPUT MODULES, DC EXCITATION Part No. Suffix NONE D NONE D C E B INPUT RANGE OUTPUT RANGE MATCHED-PAIR SERVO/MOTOR CONTROLLER DRIVERS, 1kHz BW MODEL SCM5B392-0111 SCM5B392-0212 SCM5B392-0313 SCM5B392-0414 INPUT RANGE OUTPUT RANGE 2-WIRE TRANSMITTER-INTERFACE MODULES, 100Hz BW MODEL SCM5B42-01 SCM5B42-02 MAXIMUM INPUT OUTPUT RANGE† INPUT RANGE OUTPUT RANGE† INPUT RANGE OUTPUT RANGE † ACCELEROMETER-INPUT MODULES, 2.5kHz to 20kHz BW Gain, bandwidth, and excitation are switch-programmable...

ISOLATED ANALOG SIGNAL CONDITIONING PRODUCTS - SCM5B SCM5B Selection Guide (Continued) INPUT RANGE OUTPUT RANGE Attenuator Module, Pass-Thru 1-to-1 Backpanel, 8-channel Backpanel, 8-channel, DIN-rail Mount Backpanel, 16-channel Backpanel, 16-channel, DIN-rail Mount Part No. Suffix NONE D NONE D C E B ‡ THERMOCOUPLE ALLOY COMBINATIONS Standards: DIN IEC 584, ANSI MC96-1-82, JIS C 1602-1981 Material Iron vs. Copper-Nickel Nickel-Chromium vs. Nickel-Aluminum Copper vs. Copper-Nickel Nickel-Chromium vs. Copper-Nickel Platinum-13% Rhodium vs. Platinum Platinum-10% Rhodium vs. Platinum...

ISOLATED ANALOG SIGNAL CONDITIONING PRODUCTS - SCM5B RoHS III Analog Voltage-input Modules, Narrow Bandwidth DESCRIPTION Each SCM5B30 and SCM5B31 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output (Figure below). This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without the requirement of external multiplexers. The SCM5B module family is designed with a completely isolated computerside circuit which can be floated to ±50V from Power...

ISOLATED ANALOG SIGNAL CONDITIONING PRODUCTS - SCM5B Ordering Information Module Input Range Input Bias Current Input Resistance Normal Input Protection Continuous Transient See Ordering Information 50Ω Continuous Short-to-Ground 6μs at CLOAD = 0 to 2000pF See Ordering Information 50Ω Continuous Short-to-Ground 6μs at CLOAD = 0 to 2000pF Power Supply Voltage Power Supply Current Power Supply Sensitivity Mechanical Dimensions (h)x(w)x(d) –40°C to +85°C –40°C to +85°C 0 to 95% Noncondensing ISM, Group 1 Class A ISM, Group 1 Performance A ±0.5% Span Error Performance B –40°C to +85°C –40°C to...

ISOLATED ANALOG SIGNAL CONDITIONING PRODUCTS - SCM5B RoHS III Analog Current-input Modules DESCRIPTION Each SCM5B32 current-input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output (Figure below). This voltage output is logic switch controlled, which allows these modules to share a common analog bus without the requirement of external multiplexers. The SCM5B module family is designed with a completely isolated computer side circuit which can be floated to ±50V from Power Common, pin 16. This complete...