PSF-2 Power Splitter & Distribution Device with Fuses 2 Connector 8-36 Vdc IP67 Technical Data Aluminum, black anodized Housing Cover Dimensions (l x w x h) Weight ABS, black, velvet matte with gasket 6.625 x 5.25 x 2.063 in (169 x 134 x 53 mm) 1.76 lbs (0.80 kg) Screw connection 4 x ¼” (not included) Cover thumb screw/captive washer 8-32 (included) 15 Amp fuse Max. (fuses not included) Power Stud (3/8-16): dry torque 154 in-lbs. Ground Stud (5/16-18): dry torque 86 in-lbs. Thumb Screw: dry torque 13 in-lbs. Torque Specification Mating Connectors and Accessories Deutsch® Key A connector Deutsch® Key B connector Deutsch® size 16 Socket DT06-12SA DT06-12SB 0462-201-16141 (16 – 20 AWG) 1062-16-0122 (14 – 18 AWG) W12S 114017 Automotive Blade Type (ATO/ATC) 15A max. DP-38022-120 8-36 V DC 90A max. 13.5A continuous per pin max. 2 – 1 Main Power 3/8” Stud 1 Main Ground 5/16” Stud 2 - 12 Pin Connectors (6 power and 6 ground each) -40…80 °C Deutsch® Wedgelock Deutsch® Seal Plug Fuses Replacement Cover Kit Operating Voltage Input Current Output Current Total Inputs Total Outputs Operating Temperature Storage Temperature -40…80 °C User to protect input stud(s) Connector seal plugs required for unused pins Data Sheet PSF-2 Power Splitter & Distribution Device 2 Connector Sheet

Operating States (LEDs) POWER LED Output LED Color Blue Green Status Illuminated on POWER and GROUND present One per Fuse, Illuminated on fuse good Connector Wire Diagram Notes: 1. All power to vehicle must be turned off prior installation of the device. 2. The device should only be installed by a trained electrician following standard best practices 3. To maintain IP rating, sealing plugs need to be installed on all unpopulated positions on mating connectors. 4. To maintain IP rating, fuse cover needs to have gasket present and thumb nut manually tightened to dry torque 13 in-lbs. to maintain...