DW-ST Weighing indicators 49 x 96 panel mount WEIGHING Indicator DW-ST/B FEATURES: 3 Load Cell Input with a 24 bits A/D Sigma-Delta converter. 3 Enhanced protection against EMI (Electromagnetic interferences) 3 7 Segments Display of 6 Digits (12 mm). 3 14 Led show the state of the indicator. 3 1 Serial Port RS232C or RS485 to communicate with PC, Printers or Remote displays. 3 5 Keys Keyboard to use and program the controller. 3 Electronic and mechanical seal. 3 Standard or configurable ticket through PC Utility. 3 Modbus ASCII Protocol. 3 Indicator with mV pre-calibration. 3 Power Supply: 9..30Vdc / 9..24Vac 3 Dimensions: 48x96x116mm. DW-ST/D FEATURES: 3 Idem DW-ST/B 3 2 PNP or NPN Opto-isolated Inputs. 3 2 Relay outputs DW-ST/F FEATURES: 3 Idem DW-ST/B 3 2 PNP or NPN Opto-isolated Inputs. 3 2 Relay outputs 3 Opto-isolated analogical Output: 0-20mA, 4-20mA, 0-5Vdc, 0-10Vdc. Configuration utility of the weight controller from any PC. 3 2nd RS232 serial port. 3 USB 2.0 port communication port. 3 WIFI communication port. 3 Ethernet 10/100M Base T communication port. 3 Time and date. OPERATING MODES: 3 Weight-Tare: Allow to display the weight of a scale, apply tares and untare. 3 Setpoints & Peak Memory: Allow to manage two setpoints and calculate the peaks values. 3 Accumulator: Allow to accumulate weights and number of weights. 3 Transmitter: Allows to send load cell signals through RS232 or RS485 to any device. APPLICATIONS: 3 On-Board weighing of movable equipment. 3 Maximum and minimum control level on silos. 3 Simple weight. 3 Communication with PLCs and PC. Weighing Indicator DW-ST