Weighing inidcators DW-PT Weight-Tare-Piece Counter-Accumulator Indicator FEATURES: 3 Accuracy class: III - 6000d concerning EN45501 / OIML R76 (T.C: CEM-CY-05/0422-5.2). 3 Load Cell Input with a 24 bits A/D Sigma-Delta converter. 3 Enhanced protection against EMI (Electromagnetic interferences) 3 7 Segments Display of 6 Digits (20 mm). 3 10 Led show the state of the indicator 3 1 Serial Port RS232C to communicate with PC, Printers or Remote displays. 3 ON / OFF Key on the keyboard. 3 5 Keys Keyboard to use and program the controller. 3 Electronic and mechanical seal. 3 Standard or configurable ticket through PC Utility. 3 Indicator with mV pre-calibration. 3 Power Supply: 12Vdc / 220Vac. 3 Stainless steel enclosure. 3 DW-PT and DW-PT/X: 210 x 116 x 60mm. 3 DW-PT/P: 214 x 125 x 38mm. 3 DW-PT/B: 225 x 136 x 50mm. OPTIONS: 3 One RS485 serial port. 3 2nd RS232 serial port. 3 Time and date. 3 Wall, column or table mount. 3 IP65 water proof with connectors. 3 External communication options (USB 2.0, WIFI and Ethernet 10 / 100M Base-T communication ports). Configuration utility of the weight controller from any PC. OPERATING MODES: 3 Weight-Tare: Allow to display the weight of a scale, apply tares, untare and program fixed tares. 3 Pieces Counter: Allow to count pieces. 3 Accumulator: Allow to accumulate weights and number of weights. 3 Transmitter: Allows to send load cell signals through RS232 or RS485 to any device. APPLICATIONS: 3 Simple weight. 3 On-Board weighing of movable equipment. 3 Truck weighing through PC. Weighing indicator DW-PT/P Weighing indicator DW-PT and DW-PT/X Weighing indicator DW-PT/B 3 formats available: panel, wall and desktop mount 6