High Pressure Pump Machine
1Pages

INTERNATIONAL CORPORATION S SERIES ELECTRIC SERVO HIGH PRESSURE PUMP SYSTEM — ENERGY SAVING AND EFFICIENT PERFORMANCE AND FEATURES Model Power Intensifier Mxfel Flo/v Rate Axunjlator Capacity Max Orifice Size Max Pressure FfessLre fluctuation Noise V SERIES HIGH PRESSURE PUMP SYSTEM — INTERNATIONALLY APPLICABLE ♦ The servo motor and constant flow gear pump is combined to serve as the power unit of the system. The electric signal feed back by the pressure sensor can accurately control the motor speed in real time to control the hydraulic flow and pressure. The pressure fluctuation is small (< 5%), so that the cutting quality of the workpiece can be significantly improved; ♦ The system has two-stage pressure setting function, with the pressure to be set at 10~400MPa, increasing the application of cutting materials; ♦ The system precisely controls the hydraulic flow of the system. The hydraulic overflow is small and the calorific value is low. The cooling water requirement is lower than other types of systems, and the service life of hydraulic components is also prolonged. ♦ After the cutting head is closed, the system maintains the cutting pressure state, and the motor is in a static state after deceleration, reducing the electric power consumption. The power consumption is lower than the constant pressure pump system by more than 20%, and the energy efficiency is high. ♦ The setting operation of the system can be realized by a touch screen. All the warning and detection statuses are displayed on the touch screen in real time. PERFORMANCE AND FEATURES T SERIES HIGH PRESSURE PUMP SYSTEM — ECONOMICAL AND PRACTICAL ♦ Siemens three-phase asynchronous motor and Rexroth constant pressure plunger pump are combined to serve as the power unit of the system, to control the high pressure water output pressure of the system through the pressure regulating valve. The relatively small pressure fluctuation (< 10%) is maintained through the automatic voltage regulation function of the constant pressure piston pump; ♦ There are high-pressure and low-pressure two-stage pressure setting adjustment functions for different processing materials. For fragile and brittle materials, the pulse for low-pressure opening pressure in the drilling is very small, which will not damage the material cutting; ♦ The pressure fluctuation of the system's high pressure water is small, so that the cutting quality of workpiece can be effectively improved. Intensifier Model Accumulator Capacity Max Orifice Size Pressure Fluctuation Overall Dimension Intensifier Model Accumulator Capacity Max Orifice Size Pressure Fluctuation Overall Dimension PERFORMANCE AND FEATURES ♦ The three-phase asynchronous motor and manual variable displacement plunger pump are combined to serve as the power unit of the system. The overflow valve can be adjusted to control the system oil pressure and adjust the output pressure of high pressure water. The pressure fluctuation is <15%; ♦ The structure is simple, the operation is stable and reliable, and the maintenance cost in the later period is relatively low.