5-Axis Water Cutting System & Water Cutting Software
1Pages

INTERNATIONAL CORPORATION X-5 AB 5-Axis Small-Angle and Vertical Cutting X-5 AC 5-Axis Water Cutting System The newly-developed automatic jigsaw waterjet of Dardi is equipped with a special design of bevel edge control mechanism (AB 5-axis), to achieve the reverse cutting bevel edge for stone ceramic cutting. This eliminates the most labor-intensive and time-consuming manual grinding with the most serious dust and noise pollutions, and at the same time realizes the perfect seamless mosaic of stone ceramics. This not only improves the quality of jigsaw, but also greatly improves the cutting efficiency and saves the production costs. The new automatic jigsaw waterjet of Dardi adopts the new intelligent special cutting software for cutting patterns, which can directly acquire the cutting patterns by scanning, and then automatically select the jigsaw effect through the built-in automatic jigsaw coloring module. The automatic graphic disassembly and layout nesting modules can save the materials and improve the drawing efficiency to the utmost extent. ♦ Rotary axis (B-axis) rotation range: ±10° ; ♦ Bending axis (A-axis) adjustment range: ± 10° ; ♦ Cutting accuracy: ±0.15mm; True 5-Axis Linkage waterjet — Non-Taper Cutting / Bevel Cutting / Curved Cutting The water cutting system with X5 greatly improves the working ability of waterjet, which not only solves the bevel problem of traditional water cutting, but also easily achieves 3D water cutting. DARDI@X5 achieves the non-taper cutting, bevel cutting, chamfer cutting, and curved cutting in a high speed and one-shot molding, which is the best choice for aerospace, rail transit, military, composite materials and other industries. ♦ Drive mode: servo motor drive: EXCELLENT CUTTING PERFORMANCE A axis ±60° C axis ±360° Angle Positioning Accuracy ±60" A axis ± 90° C axis ±360° Angle Positioning Accuracy ±30" ♦ AB 5-axis automatic jigsaw waterjet is the high-end intelligent equipment developed on the basis of a number of invention patents of Dardi, which has been verified by nearly one hundred users in many years after the improvement and perfection in many years; ♦ Dardi specially develops a very strict precision standard for AB 5-axis waterjet. Each AB 5-axis waterjet produced by Dardi has been rigorously tested to meet the requirements of the standard (Q/32015 ADD004-2012); ♦ The production efficiency is increased by 50-200% compared with the traditional waterjet; ♦ The high-precision cutting head of Dardi is also equipped with diamond nozzles and long-life sand tubes to avoid the time loss due to replacement shutdown and precision adjustment, further improving the use efficiency and reducing the operating costs; ♦ The unique design of positioning and cutting head improves positioning accuracy and reliability, ensuring the constant accuracy of cutting head after each disassembly; * The international advanced ESA numerical control system and IGEMS 3D CAD/CAM software in this industry are adopted, which is not only powerful but also extremely easy to operate; ♦ There are a variety of excellent features and model sizes available for water cutting machine tool of Dardi. uriHut INTERNATIONAL CORPORATION NEW-CAM Water Cutting Software ♦ CAD drawing ♦ Automatic conversion of .DXF file exported by AUTOCAD into NC machining program: automatic cut-in and cut-out control ♦ Automatic cutting trajectory simulation, corner deceleration, material control, bridging control, and automatic kerf compensation ♦ Automatic layout (single layout, multiple layouts) and material warehouse management ♦ Automatic calculation of processing line length, processing time and processing cost + Open database that can store relevant cutting parameters for different materials (including pressure, nozzle diameter, surface quality, cutting speed, etc.) I Air source working pressure: 0.6Mpa Distance stroke: 50mm The warping and buckling are common in the cutting of large metal flat plates. The DAE automatic distance system can control the distance between the cutting head and the workpiece, avoiding the damage caused by the collision during the processing of sand tube and also reducing the labor and errors of manual cutter. ♦ CAD drawing ♦ Input of 3D parts to support various common formats (DXF/DWG/STL/STP/IGS) ♦ Scanning of graphic outlines and direct generation of graphics ♦ Practical in the field of stone jigsaw ♦ Fully automatic layout of graphics (single or multi-sheet layout) ♦ Simulation of program operation, with anti-collision and other sudden processing functions ♦ Vertical precision cutting / bevel cutting / spatial curved cutting I Working pressure: 0.2MPa Volume: 170L DAADS automatic sand supply system provides the waterjet with the function of storing sand and automatically transferring the abrasive to the sand bucket. It is maintenance-free and easy to operate, and can greatly increase the working efficiency and reduce the labor intensity of operator. The 1 70-litre volume guarantees the required amount of sand for continuous cutting from 500 to 800 minutes. The system is equipped with a high-precision sand sensor, so that the working status can be automatically monitored and alarmed automatically. 15719" LCD color LCD touch screen USB interface and RJ45 (network cable) communication interface, for convenient transmission Visualized origin setting of multiple workpieces, which is especially convenient for small batches and multi-species cutting Axis stopping function, which can interrupt the process for repair, and is easy to resume cutting Processing with any segment based on selection of graphics Returning along original track WEIHONG PC (optional) I Storage tank total volume: 410L Sand discharging rate: 38kg/min DARDI water cutting system can be equipped with Xtractor water sand separation system to realize the automatic sand discharging and waste sand collection, which can greatly improve the efficiency of sand cleaning and save the labor. Xtractor adopts an independent unit design, which occupies less space. The circulating water flow is taken from the water tank, which saves the water consumption. The bottom hydraulic discharge mechanism is equipped to achieve simple operation. I Power: 3.5~7.4Kw Cooling capacity: 6000-1 7200kcal/h The appropriate cooling system can be selected according to different high pressure systems, which can effectively control the temperature of hydraulic oil in the high pressure system, to prolong the service life of the sealed and high pressure parts and