Steel Cutter CC700 S

1 / 1 PageView full catalog

Steel Cutter CC700 S

Product catalog summary

Specifications:

Dimensions: Total length is 1475 mm (58 inches), total width is 300 mm (12 inches), and total height is 1037 mm (41 inches).
Weight: Total weight with hydraulic rotary drive, without mounting plate, is approximately 625 kg (1378 lbs). With mounting plate, it is approximately 695 kg (1532 lbs).
Carrier Compatibility: Recommended carrier weight is between 7 - 15 t (15428 - 33060 lbs).

Hydraulics:

Pressure: Minimum pressure is 17.5 MPa (175 bar), maximum pressure is 27.0 MPa (270 bar), and working pressure is 50.0 MPa (500 bar).
Oil Flow: Maximum oil flow is 150 l/min (39.6 US gal/min).

Performance:

Cutting Force: Maximum cutting force is 1840 kN (188t).
Cutting Capacity: Suitable for I-profile DIN 1025 - S235 - IPE 200, U-profile DIN 1026 - S235 - U 200, H-profile DIN 1025 - S235 - HEA 180, L-profile EN 10056 - S235 - 160x80x12, and Pipe EN10216 - X5CrNi18-10 - 168x7 (stainless steel).
Operation Time: Time to close is approximately 3 seconds, and time to open is approximately 2.5 seconds.

Additional Information:

Mounting plates for different carriers are available upon request.
Contact: Darda GmbH, Im Tal 1, Phone: +49 (0) 77 02 / 43 91 - 0, Email: [email protected], Website: www.darda.de

Catalog excerpts

STEELCUTTER CC700S Maximum force for powerful cuts! Specifications CC 700 S Measurements Total length 1,2 1475 mm 1037 mm Total width 1 Total height 300 mm 268 mm Opening width max. Cutting depth, approx. 359 mm Weights Total weight with hydr. rotary drive and mounting plate, approx. 695 kg Total weight with hydr. rotary drive, without mounting plate, approx. 625 kg Recommended weight of carrier 3 7 - 15 t Hydraulics Minimum pressure 17,5 MPa (175 bar) Maximum pressure 27,0 MPa (270 bar) Working pressure 50,0 MPa (500 bar) Oil flow max. 150 l/min Performance (at input pressure min 17,5 MPa (175 bar)) A: Maximum cutting force 1840 kN (188t) ca. 3 s Time to close 4 ca. 2,5 s Time to open 4 Cutting capacity (Selection of profiles max.) I-profile DIN 1025 - S235 - IPE 200 U-profile DIN 1026 - S235 - U 200 H-profile DIN 1025 - S235 - HEA 180 L-profile EN 10056 - S235 - 160x80x12 Pipe EN10216 - X5CrNi18-10 - 168x7 (stainless steel) 1 When completely extended 2 Without mounting plate, with rotary drive table of the mini-excavator manufacturer 4 With maximum oil flow Mounting plates for different carriers on request 58 inches 41 inches 12 inches 11 inches 14 inches 1532 lbs 1378 lbs 15428 - 33060 lbs 2538 psi 3916 psi 7252 psi 39,6 US gal/min 413648 lbf ca. 3 s ca. 2,5 s 3 Depends on carrying capacity Darda GmbH Im Tal 1 Fon + 49 (0) 77 02 / 43 91 - 0 Fax + 49 (0) 77 02 / 43 91 - 12 [email protected] www.darda.de P_9033 0700 71_e_260312 Alterations reserved Our distributor:

Open the catalog to page 1

All Darda GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list