3D Deformation Measurement on any solid Material and Contour non contact and true full field High Speed Digital 3D Correlation System Q-450-II The Digital 3D Correlation System Q-450 allows the dynamic measurement of full-field three-dimensional displacements and the subsequent analysis of strains on almost any type of material and components. Digital Image Correlation Based on the digital image correlation technique, the Q-450 system is designed for the full-field vibration analysis, high speed deformation measurement, fracture mechanics, shock excitations, determination of material parameters in dynamic material tests and high speed tensile, torsion, bending or combined tests as well as for dynamic strain measurements, e.g. in fatigue tests. An easy calibration procedure supports the quick setup of the system. >

Measurement area Some mmղ up to m, typical measurement areas are 20 x 15 mmҲ up to 400 x 300 mm Measuring results Surface contour, 3D displacements, strains at every measured point Measuring range From 100 ҵStrain up to several 100% Strain Control Electronic Portable Controller with integrated 20 TFT Display, Windows XP Professional Integrated analogue data acquisition and recording input: 8 independent free-selectable analogue Data Acquisition Channels, 16 Bit resolution, Ա 0.05 V to 10 V synchronized to camera triggering Illumination Stroboscopic cold light LED Illumination system HILIS or...