DANISH TOOL DIFFERENT -NOT ONLY IN QUALITY Phone: (+45) 86 40 29 95 - E-mail: [email protected] www.danish-tool.com

All production of our tools takes place at our factory in Denmark. In the production and the administration of Danish Tool Productions ApS we only use 100% green energy (electricity, heat, cooling and production gases), it is not only important to use clean energy, but also to reduce the use of it and for the last 15 years this has also been a strong focus of our company - with success. Diversity is also an important issue and we have ensured that the staff is a good mix of women and men, different religions and ethnicity. For more than 20 years we have worked closely with our local government...

PRODUCTIONS RECIPROCATING SAW BLADES with tungsten carbide teeth BLACK LABEL - standard for stone For cutting soft brick, lightweight concrete blocks, aerated concrete (AAC) and plasterboard. Made with tungsten carbide cylindrical teeth. Tooth pitch 16mm / 1/TPI. PURPLE LABEL - strong for stone For cutting medium brick, hollow blocks, fiber cement, aerated concrete, red brick, plasterboard, sand-lime brick and lightweight concrete blocks. Made with tungsten carbide teeth. PINK LABEL - standard for stone For cutting medium brick, hollow blocks, fiber cement, aerated concrete (AAC), red brick,...

RED LABEL - extra strong for stone For cutting medium brick, hollow blocks, fiber cement, aerated concrete, red brick, plasterboard, sand-lime brick and lightweight concrete blocks. Made with tungsten carbide teeth - self-sharpening. Extra strong and extra rigid. Item no. Length X Height ORANGE LABEL - extra strong for stone For cutting bricks, blocks and mortar joints (ideal for cutting tracks for moisture barriers). Made with large tungsten carbide teeth. Tooth pitch 12mm / 2V2TPI Extra strong and extra rigid. Item no. Length X Height BLUE LABEL - standard for stone For cutting medium to hard...

For cutting medium to hard brick, hollow blocks, fiber cement, aerated concrete, red brick, plasterboard, sand-lime brick and lightweight concrete blocks. Made with tungsten carbide teeth - self-sharpening. For cutting medium to hard brick, hollow blocks, fiber cement, aerated concrete, red brick, plasterboard, sand-lime brick and lightweight concrete blocks with embedded screws or nails (e.g., around windows or doors frames). Made with tungsten carbide cylindrical teeth. Tooth pitch 6mm / 5TPI. Extra strong and extra rigid. For cutting medium to hard brick, hollow blocks, fiber cement, aerated...

This saw blade will cut softwood and hardwood together with all those tough woods that normally destroy saw blades and make the job miserable. Wet lumber, thick pressure-treated planks and knotted living roots or thick branches all belong to this group. Made with full tungsten carbide edge. Tooth pitch 8,5mm / 3TPI. Item no. Length X Height For cutting in all types of wood (ideal for cutting into the ground around trees or edges of the lawn). Made with tungsten carbide and steel teeth. Variable tooth pitch 4-6mm / 4-6TPI. This saw blade will cut not only softwood and hardwood but also a wide...

For cutting in all types of wood as well as Eternit®, Swisspearl®, Fermacell®, Ivarplank®, HardiePlank®, HardiePanel®, Corian®, Duroplast®, Formica® and similar panels such as chipboard, MDF plasterboard and thermoplastic. - DEMOLITION STYLE (cut frame and anchor screws). Made with full tungsten carbide edge. Tooth pitch variable 2,5-3,6mm / 7-10TPI. For cutting in all types of wood pallets with nails and/or screws - the ideal blade for pallet dismantling. Made with full tungsten carbide edge. Tooth pitch variable 1,2-2,5mm / 10-14TPI. LIGHT BLUE LABEL - for metal For cutting metals, wood and...

Designed for cutting in metal, recommended material thickness 3mm to 13mm. The teeth are designed with a 0° hook angle will make clean cuts in ferrous and non-ferrous sheet metal. Made with full tungsten carbide edge. Tooth pitch 2,5mm / 10TPI. Designed for cutting in metal, recommended material thickness 1,5mm to 4mm. The teeth are designed with a 0° hook angle will make clean cuts in ferrous and non-ferrous sheet metal. Made with full tungsten carbide edge. Tooth pitch 1,4mm / 18TPI. JIGSAW BLADES with tungsten carbide teeth This saw blade will cut not only softwood and hardwood but also a...

This saw blade will cut not only softwood and hardwood but also a wide range of fiber boards and WPC wood plastic materials. Fine cut. Made with full tungsten carbide edge. For cutting Eternit®, Swisspearl®, Fermacell®, Ivarplank®, HardiePlank®, HardiePanel®, Corian®, Duroplast®, Formica® and similar panels such as chipboard, MDF plasterboard and thermoplastic. Made with full tungsten carbide edge. Designed for cutting in metal, recommended material thickness 1,5mm to 4mm. The teeth are designed with a 0° hook angle and will make clean cuts in ferrous and non-ferrous sheet metal. Made with full...

DANISH TOOLPRODUCTIONSORANGE LABEL - for stone and plaster For cutting fiber boards and masonry products. Made with full tungsten carbide dual-direction teeth/edge. Tooth pitch 1,4mm / 18TPI. For cutting composite and wood products. Made with full tungsten carbide dual-direction teeth/edge. Tooth pitch 1,4mm / 18TPI. For cutting metal products. Made with full tungsten carbide teeth/edge.

For cutting Eternit®, Swisspearl®, Fermacell®, Ivarplank®, HardiePlank®, HardiePanel®, Corian®, Duroplast®, Formica® and similar panels such as chipboard, MDF plasterboard and thermoplastic. Made with tungsten carbide cylindrical teeth - hollow point design. For cutting soft blocks (such as AAC and plaster). Made with tungsten carbide teeth - old design. Tooth pitch 19mm / 1-1/2TPI - different distance between the tungsten carbide teeth. Item no. Length DT459 700mm (1-1/2TPI - 19mm/every third is tungsten carbide) DT260 700mm (1-1/2TPI - 19mm tooth pitch/every second is tungsten carbide) DT261...